Attribute Chart

Associated Constructors

Attribute Chart

Syntax: Attribute Chart( Y( columns ), X( columns ) )

Description: Analyzes categorical measurements to show you measures of agreement across responses, such as raters.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );

Columns

By

Syntax: obj = Attribute Chart(...<By( column(s) )>...)

Description: Performs a separate analysis for each level of the specified column.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Attribute Chart(
    Y( :A, :B, :C ),
    X( :Part ),
    Standard( :Standard ),
    By( _bycol )
);

Freq

Syntax: obj = Attribute Chart(...<Freq( column )>...)

Description: Specifies a column whose values assign a frequency to each row for the analysis.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
dt << New Column( "_freqcol", Numeric, Continuous, Formula( Random Integer( 1, 5 ) ) );
obj = dt << Attribute Chart(
    Y( :A, :B, :C ),
    X( :Part ),
    Standard( :Standard ),
    Freq( _freqcol )
);

Grouping

Syntax: obj = Attribute Chart(...Grouping( column(s) )...)

Description: Specifies the classification columns that group the ratings, typically parts.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );

Response

Syntax: obj = Attribute Chart(...Response( column(s) )...)

Description: Specifies the columns of ratings given by each rater.

Example 1

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Effectiveness Report( 1 );

Example 2

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Response( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Effectiveness Report( 1 );

Standard

Syntax: obj = Attribute Chart(...<Standard( column )>...)

Description: Specifies a reference column that contains the known values for each grouping variable (part) level.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );

X

Syntax: obj = Attribute Chart(...X( column(s) )...)

Description: Specifies the classification columns that group the ratings, typically parts.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );

Y

Syntax: obj = Attribute Chart(...Y( column(s) )...)

Description: Specifies the columns of ratings given by each rater.

Example 1

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Effectiveness Report( 1 );

Example 2

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Response( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Effectiveness Report( 1 );

Item Messages

Agreement by Rater Confid Intervals

Syntax: obj << Agreement by Rater Confid Intervals( state=0|1 )

Description: Shows or hides confidence intervals about the cell agreement percents on the efficiency graph. On by default.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
Wait( 2 );
obj << Agreement by Rater Confid Intervals( 0 );

Attribute Gauge Charts

Syntax: obj << Attribute Gauge Charts( state=0|1 )

Description: Show or hides the attribute gauge chart. On by default.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
Wait( 2 );
obj << Attribute Gauge Charts( 0 );

Connect Agreement Points

Syntax: obj << Connect Agreement Points( state=0|1 )

Description: Shows or hides a line that connects the cell means within a group of cells on both the attribute gauge chart and the efficiency graph. On by default.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
Wait( 2 );
obj << Connect Agreement Points( 0 );

Connect Effectiveness Points

Syntax: obj << Connect Effectiveness Points( state=0|1 )

Description: Shows or hides a red line that connects the values of the percent agreement between the rater and the standard on both the attribute gauge chart and the efficiency graph.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Connect Effectiveness Points( 1 );

Effectiveness Report

Syntax: obj << Effectiveness Report( state=0|1 )

Description: Shows or hides a report that contains the agreement counts, effectiveness, misclassifications, and conformance. On by default.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
Wait( 2 );
obj << Effectiveness Report( 0 );

Effectiveness by Rater Confid Intervals

Syntax: obj << Effectiveness by Rater Confid Intervals( state=0|1 )

Description: Shows or hides the confidence intervals about the cell effectiveness percents on the efficiency graph.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Effectiveness by Rater Confid Intervals( 1 );

Show Agreement Grand Mean

Syntax: obj << Show Agreement Grand Mean( state=0|1 )

Description: Shows or hides a line at the value of the overall percent agreement on the attribute gauge chart. On by default.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
Wait( 2 );
obj << Show Agreement Grand Mean( 0 );

Show Agreement Group Means

Syntax: obj << Show Agreement Group Means( state=0|1 )

Description: Shows or hides a line at the value of the percent agreement within groups on the attribute gauge chart. This option requires more than one grouping variable.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
dt << New Column( "Group", formula( Sequence( 1, 3, 1, 50 ) ) );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Group, :Part ), Standard( :Standard ) );
obj << Show Agreement Group Means( 1 );

Show Agreement Points

Syntax: obj << Show Agreement Points( state=0|1 )

Description: Shows or hides the agreement points on both the attribute gauge chart and the efficiency graph. On by default.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
Wait( 2 );
obj << Show Agreement Points( 0 );

Show Effectiveness Points

Syntax: obj << Show Effectiveness Points( state=0|1 )

Description: Shows or hides the effectiveness points on both the attribute gauge chart and the efficiency graph.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Show Effectiveness Points( 1 );

Shared Item Messages

Action

Syntax: obj << Action

Description: All-purpose trapdoor within a platform to insert expressions to evaluate. Temporarily sets the DisplayBox and DataTable contexts to the Platform.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Bivariate(
    Y( :height ),
    X( :weight ),
    Action( Distribution( Y( :height, :weight ), Histograms Only ) )
);

Apply Preset

Syntax: Apply Preset( preset ); Apply Preset( source, label, <Folder( folder {, folder2, ...} )> )

Description: Apply a previously created preset to the object, updating the options and customizations to match the saved settings.

JMP Version Added: 18

Anonymous preset

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ), t Test( 1 ) );
preset = obj << New Preset();
dt2 = Open( "$SAMPLE_DATA/Dogs.jmp" );
obj2 = dt2 << Oneway( Y( :LogHist0 ), X( :drug ) );
Wait( 1 );
obj2 << Apply Preset( preset );

Search by name

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ) );
Wait( 1 );
obj << Apply Preset( "Sample Presets", "Compare Distributions" );

Search within folder(s)

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ) );
Wait( 1 );
obj << Apply Preset( "Sample Presets", "t-Tests", Folder( "Compare Means" ) );

Automatic Recalc

Syntax: obj << Automatic Recalc( state=0|1 )

Description: Redoes the analysis automatically for exclude and data changes. If the Automatic Recalc option is turned on, you should consider using Wait(0) commands to ensure that the exclude and data changes take effect before the recalculation.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Automatic Recalc( 1 );
dt << Select Rows( 5 ) << Exclude( 1 );

Broadcast

Syntax: obj << Broadcast(message)

Description: Broadcasts a message to a platform. If return results from individual objects are tables, they are concatenated if possible, and the final format is identical to either the result from the Save Combined Table option in a Table Box or the result from the Concatenate option using a Source column. Other than those, results are stored in a list and returned.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Quality Control/Diameter.jmp" );
objs = Control Chart Builder(
    Variables( Subgroup( :DAY ), Y( :DIAMETER ) ),
    By( :OPERATOR )
);
objs[1] << Broadcast( Save Summaries );

Column Switcher

Syntax: obj << Column Switcher(column reference, {column reference, ...}, < Title(title) >, < Close Outline(0|1) >, < Retain Axis Settings(0|1) >, < Layout(0|1) >)

Description: Adds a control panel for changing the platform's variables

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
obj = dt << Contingency( Y( :size ), X( :marital status ) );
ColumnSwitcherObject = obj << Column Switcher(
    :marital status,
    {:sex, :country, :marital status}
);

Copy ByGroup Script

Syntax: obj << Copy ByGroup Script

Description: Create a JSL script to produce this analysis, and put it on the clipboard.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Attribute Chart(
    Y( :A, :B, :C ),
    X( :Part ),
    Standard( :Standard ),
    By( _bycol )
);
obj[1] << Copy ByGroup Script;

Copy Script

Syntax: obj << Copy Script

Description: Create a JSL script to produce this analysis, and put it on the clipboard.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Copy Script;

Data Table Window

Syntax: obj << Data Table Window

Description: Move the data table window for this analysis to the front.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Data Table Window;

Get By Levels

Syntax: obj << Get By Levels

Description: Returns an associative array mapping the by group columns to their values.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( X( :height ), Y( :weight ), By( :sex ) );
biv << Get By Levels;

Get ByGroup Script

Syntax: obj << Get ByGroup Script

Description: Creates a script (JSL) to produce this analysis and returns it as an expression.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Attribute Chart(
    Y( :A, :B, :C ),
    X( :Part ),
    Standard( :Standard ),
    By( _bycol )
);
t = obj[1] << Get ByGroup Script;
Show( t );

Get Container

Syntax: obj << Get Container

Description: Returns a reference to the container box that holds the content for the object.

General

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
t = obj << Get Container;
Show( (t << XPath( "//OutlineBox" )) << Get Title );

Platform with Filter

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
gb = Graph Builder(
    Show Control Panel( 0 ),
    Variables( X( :height ), Y( :weight ) ),
    Elements( Points( X, Y, Legend( 1 ) ), Smoother( X, Y, Legend( 2 ) ) ),
    Local Data Filter(
        Add Filter(
            columns( :age, :sex, :height ),
            Where( :age == {12, 13, 14} ),
            Where( :sex == "F" ),
            Where( :height >= 55 ),
            Display( :age, N Items( 6 ) )
        )
    )
);
New Window( "platform boxes",
    H List Box(
        Outline Box( "Report(platform)", Report( gb ) << Get Picture ),
        Outline Box( "platform << Get Container", (gb << Get Container) << Get Picture )
    )
);

Get Data Table

Syntax: obj << Get Data Table

Description: Returns a reference to the data table.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
t = obj << Get Datatable;
Show( N Rows( t ) );

Get Group Platform

Syntax: obj << Get Group Platform

Description: Return the Group Platform object if this platform is part of a Group. Otherwise, returns Empty().

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( Y( :weight ), X( :height ), By( :sex ) );
group = biv[1] << Get Group Platform;
Wait( 1 );
group << Layout( "Arrange in Tabs" );

Get Script

Syntax: obj << Get Script

Description: Creates a script (JSL) to produce this analysis and returns it as an expression.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
t = obj << Get Script;
Show( t );

Get Script With Data Table

Syntax: obj << Get Script With Data Table

Description: Creates a script(JSL) to produce this analysis specifically referencing this data table and returns it as an expression.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
t = obj << Get Script With Data Table;
Show( t );

Get Timing

Syntax: obj << Get Timing

Description: Times the platform launch.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
t = obj << Get Timing;
Show( t );

Get Web Support

Syntax: obj << Get Web Support

Description: Return a number indicating the level of Interactive HTML support for the display object. 1 means some or all elements are supported. 0 means no support.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Bivariate( Y( :Weight ), X( :Height ) );
s = obj << Get Web Support();
Show( s );

Get Where Expr

Syntax: obj << Get Where Expr

Description: Returns the Where expression for the data subset, if the platform was launched with By() or Where(). Otherwise, returns Empty()

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( X( :height ), Y( :weight ), By( :sex ) );
biv2 = dt << Bivariate( X( :height ), Y( :weight ), Where( :age < 14 & :height > 60 ) );
Show( biv[1] << Get Where Expr, biv2 << Get Where Expr );

Ignore Platform Preferences

Syntax: Ignore Platform Preferences( state=0|1 )

Description: Ignores the current settings of the platform's preferences. The message is ignored when sent to the platform after creation.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Bivariate(
    Ignore Platform Preferences( 1 ),
    Y( :height ),
    X( :weight ),
    Action( Distribution( Y( :height, :weight ), Histograms Only ) )
);

Local Data Filter

Syntax: obj << Local Data Filter

Description: To filter data to specific groups or ranges, but local to this platform

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
dt << Distribution(
    Nominal Distribution( Column( :country ) ),
    Local Data Filter(
        Add Filter( columns( :sex ), Where( :sex == "Female" ) ),
        Mode( Show( 1 ), Include( 1 ) )
    )
);

New JSL Preset

Syntax: New JSL Preset( preset )

Description: For testing purposes, create a preset directly from a JSL expression. Like <<New Preset, it will return a Platform Preset that can be applied using <<Apply Preset. But it allows you to specify the full JSL expression for the preset to test outside of normal operation. You will get an Assert on apply if the platform names do not match, but that is expected.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :Height ), X( :Age ) );
preset = obj << New JSL Preset( Oneway( Y( :A ), X( :B ), Each Pair( 1 ) ) );
Wait( 1 );
obj << Apply Preset( preset );

New Preset

Syntax: obj = New Preset()

Description: Create an anonymous preset representing the options and customizations applied to the object. This object can be passed to Apply Preset to copy the settings to another object of the same type.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ), t Test( 1 ) );
preset = obj << New Preset();

Paste Local Data Filter

Syntax: obj << Paste Local Data Filter

Description: Apply the local data filter from the clipboard to the current report.

dt = Open( "$SAMPLE_DATA/Cities.jmp" );
dist = Distribution( Continuous Distribution( Column( :POP ) ) );
filter = dist << Local Data Filter(
    Add Filter( columns( :Region ), Where( :Region == "MW" ) )
);
filter << Copy Local Data Filter;
dist2 = Distribution( Continuous Distribution( Column( :Lead ) ) );
Wait( 1 );
dist2 << Paste Local Data Filter;

Redo Analysis

Syntax: obj << Redo Analysis

Description: Rerun this same analysis in a new window. The analysis will be different if the data has changed.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Redo Analysis;

Redo ByGroup Analysis

Syntax: obj << Redo ByGroup Analysis

Description: Rerun this same analysis in a new window. The analysis will be different if the data has changed.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Attribute Chart(
    Y( :A, :B, :C ),
    X( :Part ),
    Standard( :Standard ),
    By( _bycol )
);
obj[1] << Redo ByGroup Analysis;

Relaunch Analysis

Syntax: obj << Relaunch Analysis

Description: Opens the platform launch window and recalls the settings that were used to create the report.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Relaunch Analysis;

Relaunch ByGroup

Syntax: obj << Relaunch ByGroup

Description: Opens the platform launch window and recalls the settings that were used to create the report.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Attribute Chart(
    Y( :A, :B, :C ),
    X( :Part ),
    Standard( :Standard ),
    By( _bycol )
);
obj[1] << Relaunch ByGroup;

Remove Column Switcher

Syntax: obj << Remove Column Switcher

Description: Removes the most recent Column Switcher that has been added to the platform.

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
obj = dt << Contingency( Y( :size ), X( :marital status ) );
ColumnSwitcherObject = obj << Column Switcher(
    :marital status,
    {:sex, :country, :marital status}
);
Wait( 2 );
obj << Remove Column Switcher;

Remove Local Data Filter

Syntax: obj << Remove Local Data Filter

Description: If a local data filter has been created, this removes it and restores the platform to use all the data in the data table directly

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
dist = dt << Distribution(
    Nominal Distribution( Column( :country ) ),
    Local Data Filter(
        Add Filter( columns( :sex ), Where( :sex == "Female" ) ),
        Mode( Show( 1 ), Include( 1 ) )
    )
);
Wait( 2 );
dist << remove local data filter;

Render Preset

Syntax: Render Preset( preset )

Description: For testing purposes, show the platform rerun script that would be used when applying a platform preset to the platform in the log. No changes are made to the platform.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :Height ), X( :Age ) );
obj << Render Preset( Expr( Oneway( Y( :A ), X( :B ), Each Pair( 1 ) ) ) );

Report

Syntax: obj << Report;Report( obj )

Description: Returns a reference to the report object.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
r = obj << Report;
t = r[Outline Box( 1 )] << Get Title;
Show( t );

Report View

Syntax: obj << Report View( "Full"|"Summary" )

Description: The report view determines the level of detail visible in a platform report. Full shows all of the detail, while Summary shows only select content, dependent on the platform. For customized behavior, display boxes support a <<Set Summary Behavior message.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Report View( "Summary" );

Save ByGroup Script to Data Table

Syntax: Save ByGroup Script to Data Table( <name>, < <<Append Suffix(0|1)>, < <<Prompt(0|1)>, < <<Replace(0|1)> );

Description: Creates a JSL script to produce this analysis, and save it as a table property in the data table. You can specify a name for the script. The Append Suffix option appends a numeric suffix to the script name, which differentiates the script from an existing script with the same name. The Prompt option prompts the user to specify a script name. The Replace option replaces an existing script with the same name.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Attribute Chart(
    Y( :A, :B, :C ),
    X( :Part ),
    Standard( :Standard ),
    By( _bycol )
);
obj[1] << Save ByGroup Script to Data Table;

Save ByGroup Script to Journal

Syntax: obj << Save ByGroup Script to Journal

Description: Create a JSL script to produce this analysis, and add a Button to the journal containing this script.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Attribute Chart(
    Y( :A, :B, :C ),
    X( :Part ),
    Standard( :Standard ),
    By( _bycol )
);
obj[1] << Save ByGroup Script to Journal;

Save ByGroup Script to Script Window

Syntax: obj << Save ByGroup Script to Script Window

Description: Create a JSL script to produce this analysis, and append it to the current Script text window.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Attribute Chart(
    Y( :A, :B, :C ),
    X( :Part ),
    Standard( :Standard ),
    By( _bycol )
);
obj[1] << Save ByGroup Script to Script Window;

Save Script for All Objects

Syntax: obj << Save Script for All Objects

Description: Creates a script for all report objects in the window and appends it to the current Script window. This option is useful when you have multiple reports in the window.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Save Script for All Objects;

Save Script for All Objects To Data Table

Syntax: obj << Save Script for All Objects To Data Table( <name> )

Description: Saves a script for all report objects to the current data table. This option is useful when you have multiple reports in the window. The script is named after the first platform unless you specify the script name in quotes.

Example 1

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Attribute Chart(
    Y( :A, :B, :C ),
    X( :Part ),
    Standard( :Standard ),
    By( _bycol )
);
obj[1] << Save Script for All Objects To Data Table;

Example 2

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Attribute Chart(
    Y( :A, :B, :C ),
    X( :Part ),
    Standard( :Standard ),
    By( _bycol )
);
obj[1] << Save Script for All Objects To Data Table( "My Script" );

Save Script to Data Table

Syntax: Save Script to Data Table( <name>, < <<Prompt(0|1)>, < <<Replace(0|1)> );

Description: Create a JSL script to produce this analysis, and save it as a table property in the data table.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Save Script to Data Table( "My Analysis", <<Prompt( 0 ), <<Replace( 0 ) );

Save Script to Journal

Syntax: obj << Save Script to Journal

Description: Create a JSL script to produce this analysis, and add a Button to the journal containing this script.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Save Script to Journal;

Save Script to Report

Syntax: obj << Save Script to Report

Description: Create a JSL script to produce this analysis, and show it in the report itself. Useful to preserve a printed record of what was done.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Save Script to Report;

Save Script to Script Window

Syntax: obj << Save Script to Script Window

Description: Create a JSL script to produce this analysis, and append it to the current Script text window.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Save Script to Script Window;

SendToByGroup

Syntax: SendToByGroup( {":Column == level"}, command );

Description: Sends platform commands or display customization commands to each level of a by-group.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Distribution(
    By( :Sex ),
    SendToByGroup(
        {:sex == "F"},
        Continuous Distribution( Column( :weight ), Normal Quantile Plot( 1 ) )
    ),
    SendToByGroup( {:sex == "M"}, Continuous Distribution( Column( :weight ) ) )
);

SendToEmbeddedScriptable

Syntax: SendToEmbeddedScriptable( Dispatch( "Outline name", "Element name", command );

Description: SendToEmbeddedScriptable restores settings of embedded scriptable objects.

dt = Open( "$SAMPLE_DATA/Reliability/Fan.jmp" );
dt << Life Distribution(
    Y( :Time ),
    Censor( :Censor ),
    Censor Code( 1 ),
    <<Fit Weibull,
    SendToEmbeddedScriptable(
        Dispatch(
            {"Statistics", "Parametric Estimate - Weibull", "Profilers", "Density Profiler"},
            {1, Confidence Intervals( 0 ), Term Value( Time( 6000, Lock( 0 ), Show( 1 ) ) )}
        )
    )
);

SendToReport

Syntax: SendToReport( Dispatch( "Outline name", "Element name", Element type, command );

Description: Send To Report is used in tandem with the Dispatch command to customize the appearance of a report.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Distribution(
    Nominal Distribution( Column( :age ) ),
    Continuous Distribution( Column( :weight ) ),
    SendToReport( Dispatch( "age", "Distrib Nom Hist", FrameBox, {Frame Size( 178, 318 )} ) )
);

Sync to Data Table Changes

Syntax: obj << Sync to Data Table Changes

Description: Sync with the exclude and data changes that have been made.

dt = Open( "$SAMPLE_DATA/Cities.jmp" );
dist = Distribution( Continuous Distribution( Column( :POP ) ) );
Wait( 1 );
dt << Delete Rows( dt << Get Rows Where( :Region == "W" ) );
dist << Sync To Data Table Changes;

Title

Syntax: obj << Title( "new title" )

Description: Sets the title of the platform.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Title( "My Platform" );

Top Report

Syntax: obj << Top Report

Description: Returns a reference to the root node in the report.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
r = obj << Top Report;
t = r[Outline Box( 1 )] << Get Title;
Show( t );

Transform Column

Syntax: obj = <Platform>(... Transform Column(<name>, Formula(<expression>), [Random Seed(<n>)], [Numeric|Character|Expression], [Continuous|Nominal|Ordinal|Unstructured Text], [column properties]) ...)

Description: Create a transform column in the local context of an object, usually a platform. The transform column is active only for the lifetime of the platform.

JMP Version Added: 16

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Distribution(
    Transform Column( "age^2", Format( "Fixed Dec", 5, 0 ), Formula( :age * :age ) ),
    Continuous Distribution( Column( :"age^2"n ) )
);

View Web XML

Syntax: obj << View Web XML

Description: Returns the XML code that is used to create the interactive HTML report.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Bivariate( Y( :Weight ), X( :Height ) );
xml = obj << View Web XML;

Window View

Syntax: obj = Attribute Chart(...Window View( "Visible"|"Invisible"|"Private" )...)

Description: Set the type of the window to be created for the report. By default a Visible report window will be created. An Invisible window will not appear on screen, but is discoverable by functions such as Window(). A Private window responds to most window messages but is not discoverable and must be addressed through the report object

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( Window View( "Private" ), Y( :weight ), X( :height ), Fit Line );
eqn = Report( biv )["Linear Fit", Text Edit Box( 1 )] << Get Text;
biv << Close Window;
New Window( "Bivariate Equation",
    Outline Box( "Big Class Linear Fit", Text Box( eqn, <<Set Base Font( "Title" ) ) )
);

Conformance Report

Item Messages

Calculate Escape Rate

Syntax: obj << Calculate Escape Rate( state=0|1 )

Description: Shows or hides a report that contains the escape rate based on the given probability of nonconformance.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart(
    Y( :A, :B, :C ),
    X( :Part ),
    Standard( :Standard ),
    Probability of Nonconformance( 0.1 )
);
obj << Calculate Escape Rate( 1 );

Change Conforming Category

Syntax: obj << Change Conforming Category( state=0|1 )

Description: Specifies which category is used as the conforming identifier.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart( Y( :A, :B, :C ), X( :Part ), Standard( :Standard ) );
obj << Change Conforming Category( 1 );

Probability of Nonconformance

Syntax: Attribute Chart( Probability of Nonconformance( probability ) )

Description: Sets the probability of nonconformance for subsequent use in the escape rate calculations.

dt = Open( "$SAMPLE_DATA/Attribute Gauge.jmp" );
obj = dt << Attribute Chart(
    Y( :A, :B, :C ),
    X( :Part ),
    Standard( :Standard ),
    Probability of Nonconformance( 0.1 )
);
obj << Calculate Escape Rate( 1 );