Model Driven Multivariate Control Chart

Associated Constructors

Model Driven Multivariate Control Chart

Syntax: Model Driven Multivariate Control Chart( Process( columns ) )

Description: Creates multivariate control charts based on principal components or partial least squares methods.

JMP Version Added: 15

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);

Columns

By

Syntax: obj << By( column(s) )

JMP Version Added: 15

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    By( _bycol )
);

Process

Syntax: obj << Process( column(s) )

JMP Version Added: 15

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);

Time ID

Syntax: obj << Time ID( column )

JMP Version Added: 15

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    Time ID( :Flight Date ),

);

Item Messages

Alarm Script

Syntax: Alarm Script(Write("...")|Speak("...")|Mail(address, subject,"...") )

Description: Sends a message whenever a point on a control chart fails a given test. The message can be sent to the log, can be spoken, or can be emailed.

JMP Version Added: 19

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    Set Component( 3 ),
    "Historical Data End at Row"(16),
    Normalized DModX Plot,
    Alarm Script(
        Write(
            Substitute(
                    "Out of Control from ^QCNOTES in column ^QCCOL in sample ^QCSAMPLE from the table of ^QCTABLE.",
                "^QCNOTES", qc_notes,
                "^QCCOL", qc_col,
                "^QCSAMPLE", Char( qc_sample ),
                "^QCTABLE", qc_tableName
            ) || " \!N"
        )
    )
);
obj << Show Alarm Report( 1 );

Change Point Detection

Syntax: obj << Change Point Detection( state=0|1 )

Description: Displays or hides a phase-detection plot of test statistics by row number and a scatterplot matrix.

dt = Open( "$SAMPLE_DATA/Quality Control/Steam Turbine Historical.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :Fuel, :Steam Flow, :Steam Temp, :MW, :Cool Temp, :Pressure )
);
obj << Change Point Detection( 1 );

Diagnose the Process

Syntax: obj << Diagnose the Process( state=0|1 )

Description: Shows or hides diagnostic plots.

JMP Version Added: 15

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    T Square Plot( Contribution Proportion Plot for Selected Samples( {24} ) )
);
obj << Diagnose the Process( 0 );

Historical Data End at Row

Syntax: obj = Model Driven Multivariate Control Chart(...Historical Data End at Row( number )...)

Description: The specified row number splits the observations into historical and current data.

JMP Version Added: 15

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    Historical Data End at Row( 16 )
);

Normalized DModX Plot

Syntax: obj << Normalized DModX Plot( state=0|1 )

Description: Shows or hides a plot of the normalized DModX values. DModX measures the distance of each observation to the PCA or PLS model.

JMP Version Added: 15

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Normalized DModX Plot( 1 );

Parallel Coord Plot

Syntax: obj << Parallel Coord Plot( state=0|1 )

Description: Shows or hides a parallel coordinate plot of the variables.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Set Component( 3 ),
    "Historical Data End at Row"(16),
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Parallel Coord Plot( Show Mean( 1 ) );

Score Plot

Syntax: obj << Score Plot( state=0|1 )

Description: Shows or hides a score plot of principal components or partial least squares factors.

JMP Version Added: 15

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Score Plot( 1 );

Set Alpha Level

Syntax: obj << Set Alpha Level( "0.01"|"0.05"|"0.10"|"0.50"|"Other…" )

Description: Specifies the alpha level that is used to compute the decision limits.

JMP Version Added: 15

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Set Alpha Level( 0.1 );

Set Component

Syntax: obj << Set Component( number )

Description: Enables you to set the number of components for the T², DModX, and SPE plots.

JMP Version Added: 15

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Set Component( 2 );

Set α Level

Syntax: obj << Set α Level( "0.01"|"0.05"|"0.10"|"0.50"|"Other…" )

Description: Specifies the alpha level that is used to compute the decision limits.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Set Alpha Level( 0.1 );

Show Alarm Report

Syntax: obj << Show Alarm Report( state=0|1 )

Description: Shows or hides the alarm rate report.

JMP Version Added: 19

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    Set Component( 3 ),
    "Historical Data End at Row"(16),
    Normalized DModX Plot
);
obj << Show Alarm Report( 1 );

Show Excluded Rows

Syntax: obj << Show Excluded Rows( state=0|1 )

Description: Shows or hides excluded rows on plots. When this option is selected, excluded rows are included in the count of out of control points, but excluded from numerical calculations. On by default.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
dt << Select Rows( 1 :: 5 );
dt << Exclude();
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Show Excluded Rows( 0 );

Show History Summary Statistics

Syntax: obj << Show History Summary Statistics( state=0|1 )

Description: Shows or hides summary statistics that contain eigenvalues, principal component loadings, and process variable means and standard deviations. The means and standard deviations are calculated from historical data and are used to compute principal component scores, T square, squared prediction error (SPE), and DModX statistics for the current data.

JMP Version Added: 15

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Show History Summary Statistics( 1 );

Show Monitoring Plots

Syntax: obj << Show Monitoring Plots( state=0|1 )

Description: Shows or hides selected process monitoring plots.

JMP Version Added: 15

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Show Monitoring Plots( 0 );

Squared Prediction Error Plot

Syntax: obj << Squared Prediction Error Plot( state=0|1 )

Description: Shows or hides a plot of the squared prediction error (SPE). SPE measures the sum of squared residuals from the PCA or PLS model.

JMP Version Added: 15

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Squared Prediction Error Plot( 1 );

T² Plot

Syntax: obj << T² Plot( state=0|1 )

Description: Shows or hides a plot of the T² statistic. T² measures how far away an observation is from the center of a PCA or PLS model. On by default.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << T Square Plot( 0 );

Shared Item Messages

Action

Syntax: obj << Action

Description: All-purpose trapdoor within a platform to insert expressions to evaluate. Temporarily sets the DisplayBox and DataTable contexts to the Platform.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Bivariate(
    Y( :height ),
    X( :weight ),
    Action( Distribution( Y( :height, :weight ), Histograms Only ) )
);

Apply Preset

Syntax: Apply Preset( preset ); Apply Preset( source, label, <Folder( folder {, folder2, ...} )> )

Description: Apply a previously created preset to the object, updating the options and customizations to match the saved settings.

JMP Version Added: 18

Anonymous preset

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ), t Test( 1 ) );
preset = obj << New Preset();
dt2 = Open( "$SAMPLE_DATA/Dogs.jmp" );
obj2 = dt2 << Oneway( Y( :LogHist0 ), X( :drug ) );
Wait( 1 );
obj2 << Apply Preset( preset );

Search by name

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ) );
Wait( 1 );
obj << Apply Preset( "Sample Presets", "Compare Distributions" );

Search within folder(s)

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ) );
Wait( 1 );
obj << Apply Preset( "Sample Presets", "t-Tests", Folder( "Compare Means" ) );

Automatic Recalc

Syntax: obj << Automatic Recalc( state=0|1 )

Description: Redoes the analysis automatically for exclude and data changes. If the Automatic Recalc option is turned on, you should consider using Wait(0) commands to ensure that the exclude and data changes take effect before the recalculation.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Automatic Recalc( 1 );
dt << Select Rows( 5 ) << Exclude( 1 );

Broadcast

Syntax: obj << Broadcast(message)

Description: Broadcasts a message to a platform. If return results from individual objects are tables, they are concatenated if possible, and the final format is identical to either the result from the Save Combined Table option in a Table Box or the result from the Concatenate option using a Source column. Other than those, results are stored in a list and returned.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Quality Control/Diameter.jmp" );
objs = Control Chart Builder(
    Variables( Subgroup( :DAY ), Y( :DIAMETER ) ),
    By( :OPERATOR )
);
objs[1] << Broadcast( Save Summaries );

Column Switcher

Syntax: obj << Column Switcher(column reference, {column reference, ...}, < Title(title) >, < Close Outline(0|1) >, < Retain Axis Settings(0|1) >, < Layout(0|1) >)

Description: Adds a control panel for changing the platform's variables

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
obj = dt << Contingency( Y( :size ), X( :marital status ) );
ColumnSwitcherObject = obj << Column Switcher(
    :marital status,
    {:sex, :country, :marital status}
);

Copy ByGroup Script

Syntax: obj << Copy ByGroup Script

Description: Create a JSL script to produce this analysis, and put it on the clipboard.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    By( _bycol )
);
obj[1] << Copy ByGroup Script;

Copy Script

Syntax: obj << Copy Script

Description: Create a JSL script to produce this analysis, and put it on the clipboard.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Copy Script;

Data Table Window

Syntax: obj << Data Table Window

Description: Move the data table window for this analysis to the front.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Data Table Window;

Get By Levels

Syntax: obj << Get By Levels

Description: Returns an associative array mapping the by group columns to their values.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( X( :height ), Y( :weight ), By( :sex ) );
biv << Get By Levels;

Get ByGroup Script

Syntax: obj << Get ByGroup Script

Description: Creates a script (JSL) to produce this analysis and returns it as an expression.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    By( _bycol )
);
t = obj[1] << Get ByGroup Script;
Show( t );

Get Container

Syntax: obj << Get Container

Description: Returns a reference to the container box that holds the content for the object.

General

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
t = obj << Get Container;
Show( (t << XPath( "//OutlineBox" )) << Get Title );

Platform with Filter

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
gb = Graph Builder(
    Show Control Panel( 0 ),
    Variables( X( :height ), Y( :weight ) ),
    Elements( Points( X, Y, Legend( 1 ) ), Smoother( X, Y, Legend( 2 ) ) ),
    Local Data Filter(
        Add Filter(
            columns( :age, :sex, :height ),
            Where( :age == {12, 13, 14} ),
            Where( :sex == "F" ),
            Where( :height >= 55 ),
            Display( :age, N Items( 6 ) )
        )
    )
);
New Window( "platform boxes",
    H List Box(
        Outline Box( "Report(platform)", Report( gb ) << Get Picture ),
        Outline Box( "platform << Get Container", (gb << Get Container) << Get Picture )
    )
);

Get Data Table

Syntax: obj << Get Data Table

Description: Returns a reference to the data table.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
t = obj << Get Datatable;
Show( N Rows( t ) );

Get Group Platform

Syntax: obj << Get Group Platform

Description: Return the Group Platform object if this platform is part of a Group. Otherwise, returns Empty().

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( Y( :weight ), X( :height ), By( :sex ) );
group = biv[1] << Get Group Platform;
Wait( 1 );
group << Layout( "Arrange in Tabs" );

Get Script

Syntax: obj << Get Script

Description: Creates a script (JSL) to produce this analysis and returns it as an expression.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
t = obj << Get Script;
Show( t );

Get Script With Data Table

Syntax: obj << Get Script With Data Table

Description: Creates a script(JSL) to produce this analysis specifically referencing this data table and returns it as an expression.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
t = obj << Get Script With Data Table;
Show( t );

Get Timing

Syntax: obj << Get Timing

Description: Times the platform launch.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
t = obj << Get Timing;
Show( t );

Get Web Support

Syntax: obj << Get Web Support

Description: Return a number indicating the level of Interactive HTML support for the display object. 1 means some or all elements are supported. 0 means no support.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Bivariate( Y( :Weight ), X( :Height ) );
s = obj << Get Web Support();
Show( s );

Get Where Expr

Syntax: obj << Get Where Expr

Description: Returns the Where expression for the data subset, if the platform was launched with By() or Where(). Otherwise, returns Empty()

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( X( :height ), Y( :weight ), By( :sex ) );
biv2 = dt << Bivariate( X( :height ), Y( :weight ), Where( :age < 14 & :height > 60 ) );
Show( biv[1] << Get Where Expr, biv2 << Get Where Expr );

Ignore Platform Preferences

Syntax: Ignore Platform Preferences( state=0|1 )

Description: Ignores the current settings of the platform's preferences. The message is ignored when sent to the platform after creation.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Bivariate(
    Ignore Platform Preferences( 1 ),
    Y( :height ),
    X( :weight ),
    Action( Distribution( Y( :height, :weight ), Histograms Only ) )
);

Local Data Filter

Syntax: obj << Local Data Filter

Description: To filter data to specific groups or ranges, but local to this platform

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
dt << Distribution(
    Nominal Distribution( Column( :country ) ),
    Local Data Filter(
        Add Filter( columns( :sex ), Where( :sex == "Female" ) ),
        Mode( Show( 1 ), Include( 1 ) )
    )
);

New JSL Preset

Syntax: New JSL Preset( preset )

Description: For testing purposes, create a preset directly from a JSL expression. Like <<New Preset, it will return a Platform Preset that can be applied using <<Apply Preset. But it allows you to specify the full JSL expression for the preset to test outside of normal operation. You will get an Assert on apply if the platform names do not match, but that is expected.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :Height ), X( :Age ) );
preset = obj << New JSL Preset( Oneway( Y( :A ), X( :B ), Each Pair( 1 ) ) );
Wait( 1 );
obj << Apply Preset( preset );

New Preset

Syntax: obj = New Preset()

Description: Create an anonymous preset representing the options and customizations applied to the object. This object can be passed to Apply Preset to copy the settings to another object of the same type.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ), t Test( 1 ) );
preset = obj << New Preset();

Paste Local Data Filter

Syntax: obj << Paste Local Data Filter

Description: Apply the local data filter from the clipboard to the current report.

dt = Open( "$SAMPLE_DATA/Cities.jmp" );
dist = Distribution( Continuous Distribution( Column( :POP ) ) );
filter = dist << Local Data Filter(
    Add Filter( columns( :Region ), Where( :Region == "MW" ) )
);
filter << Copy Local Data Filter;
dist2 = Distribution( Continuous Distribution( Column( :Lead ) ) );
Wait( 1 );
dist2 << Paste Local Data Filter;

Redo Analysis

Syntax: obj << Redo Analysis

Description: Rerun this same analysis in a new window. The analysis will be different if the data has changed.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Redo Analysis;

Redo ByGroup Analysis

Syntax: obj << Redo ByGroup Analysis

Description: Rerun this same analysis in a new window. The analysis will be different if the data has changed.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    By( _bycol )
);
obj[1] << Redo ByGroup Analysis;

Relaunch Analysis

Syntax: obj << Relaunch Analysis

Description: Opens the platform launch window and recalls the settings that were used to create the report.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Relaunch Analysis;

Relaunch ByGroup

Syntax: obj << Relaunch ByGroup

Description: Opens the platform launch window and recalls the settings that were used to create the report.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    By( _bycol )
);
obj[1] << Relaunch ByGroup;

Remove Column Switcher

Syntax: obj << Remove Column Switcher

Description: Removes the most recent Column Switcher that has been added to the platform.

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
obj = dt << Contingency( Y( :size ), X( :marital status ) );
ColumnSwitcherObject = obj << Column Switcher(
    :marital status,
    {:sex, :country, :marital status}
);
Wait( 2 );
obj << Remove Column Switcher;

Remove Local Data Filter

Syntax: obj << Remove Local Data Filter

Description: If a local data filter has been created, this removes it and restores the platform to use all the data in the data table directly

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
dist = dt << Distribution(
    Nominal Distribution( Column( :country ) ),
    Local Data Filter(
        Add Filter( columns( :sex ), Where( :sex == "Female" ) ),
        Mode( Show( 1 ), Include( 1 ) )
    )
);
Wait( 2 );
dist << remove local data filter;

Render Preset

Syntax: Render Preset( preset )

Description: For testing purposes, show the platform rerun script that would be used when applying a platform preset to the platform in the log. No changes are made to the platform.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :Height ), X( :Age ) );
obj << Render Preset( Expr( Oneway( Y( :A ), X( :B ), Each Pair( 1 ) ) ) );

Report

Syntax: obj << Report;Report( obj )

Description: Returns a reference to the report object.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
r = obj << Report;
t = r[Outline Box( 1 )] << Get Title;
Show( t );

Report View

Syntax: obj << Report View( "Full"|"Summary" )

Description: The report view determines the level of detail visible in a platform report. Full shows all of the detail, while Summary shows only select content, dependent on the platform. For customized behavior, display boxes support a <<Set Summary Behavior message.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Report View( "Summary" );

Save ByGroup Script to Data Table

Syntax: Save ByGroup Script to Data Table( <name>, < <<Append Suffix(0|1)>, < <<Prompt(0|1)>, < <<Replace(0|1)> );

Description: Creates a JSL script to produce this analysis, and save it as a table property in the data table. You can specify a name for the script. The Append Suffix option appends a numeric suffix to the script name, which differentiates the script from an existing script with the same name. The Prompt option prompts the user to specify a script name. The Replace option replaces an existing script with the same name.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    By( _bycol )
);
obj[1] << Save ByGroup Script to Data Table;

Save ByGroup Script to Journal

Syntax: obj << Save ByGroup Script to Journal

Description: Create a JSL script to produce this analysis, and add a Button to the journal containing this script.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    By( _bycol )
);
obj[1] << Save ByGroup Script to Journal;

Save ByGroup Script to Script Window

Syntax: obj << Save ByGroup Script to Script Window

Description: Create a JSL script to produce this analysis, and append it to the current Script text window.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    By( _bycol )
);
obj[1] << Save ByGroup Script to Script Window;

Save Script for All Objects

Syntax: obj << Save Script for All Objects

Description: Creates a script for all report objects in the window and appends it to the current Script window. This option is useful when you have multiple reports in the window.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Save Script for All Objects;

Save Script for All Objects To Data Table

Syntax: obj << Save Script for All Objects To Data Table( <name> )

Description: Saves a script for all report objects to the current data table. This option is useful when you have multiple reports in the window. The script is named after the first platform unless you specify the script name in quotes.

Example 1

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    By( _bycol )
);
obj[1] << Save Script for All Objects To Data Table;

Example 2

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN ),
    By( _bycol )
);
obj[1] << Save Script for All Objects To Data Table( "My Script" );

Save Script to Data Table

Syntax: Save Script to Data Table( <name>, < <<Prompt(0|1)>, < <<Replace(0|1)> );

Description: Create a JSL script to produce this analysis, and save it as a table property in the data table.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Save Script to Data Table( "My Analysis", <<Prompt( 0 ), <<Replace( 0 ) );

Save Script to Journal

Syntax: obj << Save Script to Journal

Description: Create a JSL script to produce this analysis, and add a Button to the journal containing this script.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Save Script to Journal;

Save Script to Report

Syntax: obj << Save Script to Report

Description: Create a JSL script to produce this analysis, and show it in the report itself. Useful to preserve a printed record of what was done.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Save Script to Report;

Save Script to Script Window

Syntax: obj << Save Script to Script Window

Description: Create a JSL script to produce this analysis, and append it to the current Script text window.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Save Script to Script Window;

SendToByGroup

Syntax: SendToByGroup( {":Column == level"}, command );

Description: Sends platform commands or display customization commands to each level of a by-group.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Distribution(
    By( :Sex ),
    SendToByGroup(
        {:sex == "F"},
        Continuous Distribution( Column( :weight ), Normal Quantile Plot( 1 ) )
    ),
    SendToByGroup( {:sex == "M"}, Continuous Distribution( Column( :weight ) ) )
);

SendToEmbeddedScriptable

Syntax: SendToEmbeddedScriptable( Dispatch( "Outline name", "Element name", command );

Description: SendToEmbeddedScriptable restores settings of embedded scriptable objects.

dt = Open( "$SAMPLE_DATA/Reliability/Fan.jmp" );
dt << Life Distribution(
    Y( :Time ),
    Censor( :Censor ),
    Censor Code( 1 ),
    <<Fit Weibull,
    SendToEmbeddedScriptable(
        Dispatch(
            {"Statistics", "Parametric Estimate - Weibull", "Profilers", "Density Profiler"},
            {1, Confidence Intervals( 0 ), Term Value( Time( 6000, Lock( 0 ), Show( 1 ) ) )}
        )
    )
);

SendToReport

Syntax: SendToReport( Dispatch( "Outline name", "Element name", Element type, command );

Description: Send To Report is used in tandem with the Dispatch command to customize the appearance of a report.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Distribution(
    Nominal Distribution( Column( :age ) ),
    Continuous Distribution( Column( :weight ) ),
    SendToReport( Dispatch( "age", "Distrib Nom Hist", FrameBox, {Frame Size( 178, 318 )} ) )
);

Sync to Data Table Changes

Syntax: obj << Sync to Data Table Changes

Description: Sync with the exclude and data changes that have been made.

dt = Open( "$SAMPLE_DATA/Cities.jmp" );
dist = Distribution( Continuous Distribution( Column( :POP ) ) );
Wait( 1 );
dt << Delete Rows( dt << Get Rows Where( :Region == "W" ) );
dist << Sync To Data Table Changes;

Title

Syntax: obj << Title( "new title" )

Description: Sets the title of the platform.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
obj << Title( "My Platform" );

Top Report

Syntax: obj << Top Report

Description: Returns a reference to the root node in the report.

dt = Open( "$SAMPLE_DATA/Quality Control/Flight Delays.jmp" );
obj = dt << Model Driven Multivariate Control Chart(
    Process( :AA, :CO, :DL, :F9, :FL, :NW, :UA, :US, :WN )
);
r = obj << Top Report;
t = r[Outline Box( 1 )] << Get Title;
Show( t );

Transform Column

Syntax: obj = <Platform>(... Transform Column(<name>, Formula(<expression>), [Random Seed(<n>)], [Numeric|Character|Expression], [Continuous|Nominal|Ordinal|Unstructured Text], [column properties]) ...)

Description: Create a transform column in the local context of an object, usually a platform. The transform column is active only for the lifetime of the platform.

JMP Version Added: 16

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Distribution(
    Transform Column( "age^2", Format( "Fixed Dec", 5, 0 ), Formula( :age * :age ) ),
    Continuous Distribution( Column( :"age^2"n ) )
);

View Web XML

Syntax: obj << View Web XML

Description: Returns the XML code that is used to create the interactive HTML report.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Bivariate( Y( :Weight ), X( :Height ) );
xml = obj << View Web XML;

Window View

Syntax: obj = Model Driven Multivariate Control Chart(...Window View( "Visible"|"Invisible"|"Private" )...)

Description: Set the type of the window to be created for the report. By default a Visible report window will be created. An Invisible window will not appear on screen, but is discoverable by functions such as Window(). A Private window responds to most window messages but is not discoverable and must be addressed through the report object

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( Window View( "Private" ), Y( :weight ), X( :height ), Fit Line );
eqn = Report( biv )["Linear Fit", Text Edit Box( 1 )] << Get Text;
biv << Close Window;
New Window( "Bivariate Equation",
    Outline Box( "Big Class Linear Fit", Text Box( eqn, <<Set Base Font( "Title" ) ) )
);