Bubble Plot

Associated Constructors

Bubble Plot

Syntax: Bubble Plot( X( column ), Y( column ), <Sizes( column )>, <Time( column )>, <ID( column )>, <Coloring( column ) )

Description: Produces a two-dimensional scatterplot of bubbles that can be animated over a time variable. Additional variables can be used to size and color the bubbles.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);

Columns

By

Syntax: obj = Bubble Plot(...<By( column(s) )>...)

Description: Produce multiple reports, one for each level of the variable(s).

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    By( _bycol )
);

Coloring

Syntax: obj = Bubble Plot(...<Coloring( column )>...)

Description: Colors the bubbles according to the selected variable.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Coloring( :Pop )
);

Freq

Syntax: obj = Bubble Plot(...<Freq( column )>...)

Description: Weights computations when computing position, size, and colors of bubbles.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
dtSummary = dt << Summary(
    Group( :Country ),
    Mean( :"Portion 0-19"n ),
    Mean( :"Portion60+"n ),
    Sum( :Pop ),
    Freq( "None" ),
    Weight( "None" )
);
dtSummary << Bubble Plot(
    X( :"Mean(Portion 0-19)"n ),
    Y( :"Mean(Portion60+)"n ),
    Sizes( :"Sum(Pop)"n ),
    Freq( :N Rows )
);

ID

Syntax: obj = Bubble Plot(...<ID( column(s) )>...)

Description: Identify rows that should be aggregated and shown as a single bubble.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);

Sizes

Syntax: obj = Bubble Plot(...<Sizes( column )>...)

Description: Column to use as the size of the bubbles. If not specified, bubble size is proportional to the number of observations.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);

Time

Syntax: obj = Bubble Plot(...<Time( column )>...)

Description: Maintains separate coordinates, sizes, and colors for each unique time period.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Region, :Country ),
    Time( :Year )
);

X

Syntax: obj = Bubble Plot(...X( column )...)

Description: Column to use as the x coordinate of the bubbles in the plot.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);

Y

Syntax: obj = Bubble Plot(...Y( column )...)

Description: Column to use as the y coordinate of the bubbles in the plot.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);

Item Messages

Auto Stretching

Syntax: obj << Auto Stretching( "Auto"|"On"|"Off" )

Description: Sets the auto stretching behavior of the report.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Auto Stretching( "Off" );

Bubble Size

Syntax: obj << Bubble Size( number )

Description: Changes the size of the bubbles on the scatterplot.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Bubble Size( 50 );

Color Levels

Syntax: obj << Color Levels

Description: Set the levels for the continuous legend.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Coloring( :Pop )
);
obj << Color Levels( [100000 1000000 10000000] );

Color Theme

Syntax: obj << Color Theme

Description: Sets the color theme of the bubbles.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year ),
    Coloring( :Region )
);
obj << Color Theme( "White to Red" );

Color as Sum

Syntax: obj << Color as Sum( state=0|1 )

Description: Uses the sum of the Color variable rather than the mean of the Color variable as the Color role.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Time( :Year ),
    Coloring( :Pop ),
    ID( :Region )
);
obj << Color as Sum( 1 );

Combine

Syntax: obj << Combine( <id> )

Description: Combines the selected bubbles (or given ID) in a group into their larger bubble. This option is only available when two ID variables are used.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Region, :Country ),
    Time( :Year )
);
dt << Select Where( :Region == "Europe" );
obj << Split;
Wait( 2 );
obj << Combine( "Europe" );

Combine All

Syntax: obj << Combine All

Description: Combines all constituent bubbles in a group into their larger bubble. This option is only available when two ID variables are used.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Region, :Country ),
    Time( :Year )
);
obj << Split All;
Wait( 2 );
obj << Combine All;

Draw

Syntax: obj << Draw( "Filled"|"Outlined"|"Filled and Outlined" )

Description: Set the display mode for the bubbles.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Draw( "Outlined" );

Fit to Window

Syntax: obj << Fit to Window( "Auto"|"On"|"Off" )

Description: Sets the auto stretching behavior of the report.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Fit to Window( "Off" );

Get Custom Path

Syntax: obj << Get Custom Path

Description: Returns the custom path for the bubbles as a matrix. A path matrix has three columns for x, y, and flags for each point in the path. The flag values are 0 for control, 1 for move, 2 for line segment, 3 for cubic Bézier segment, and are negative if the point also closes the path.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Set Custom Path( "M-1,-1 L-1,1 L0,0.5 L1,1 L1,-1 L0,-0.5 L-1,-1 Z" );
obj << Set Shape( "Custom" );
obj << Get Custom Path();

Get Draw

Syntax: obj << Get Draw

Description: Returns the display mode for the bubbles.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Get Draw();

Get Label

Syntax: obj << Get Label

Description: Returns the mode for drawing bubble labels.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Get Label();

Get Shape

Syntax: obj << Get Shape

Description: Returns the shape for the bubbles.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Set Shape( "Triangle" );
obj << Get Shape();

Go

Syntax: obj << Go

Description: Initiates the animation when a Time variable is used.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year )
);
dt << Select Where( (:Country == 3300) | (:Country == 4120) );
obj << Go;

Label

Syntax: obj << Label( "None"|"Selected"|"All" )

Description: Set the mode for drawing bubble labels.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Label( "All" );

Label Offset

Syntax: obj << Label Offset( {pt, x offset, y offset}, ... )

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Region, :Country ),
    Time( :Year )
);
dt << Select Where( :Region == "Europe" | :Region == "North America" );
obj << Label Offset( {4, -75, -43}, {7, 80, -34} );

Legend

Syntax: obj << Legend( state=0|1 )

Description: Displays the color legend when a coloring column is used. On by default.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year ),
    Coloring( :Region )
);
obj << Legend( 1 );

Lock Scales

Syntax: obj << Lock Scales( state=0|1 )

Description: Locks axis, gradient, and size ranges so they do not change in response to data or filtering changes. On by default.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Lock Scales( 0 );
dt << Data Filter(
    Mode( Select( 0 ), Show( 0 ), Include( 1 ) ),
    Add Filter( Columns( :Region ) )
);

Orient Shapes

Syntax: obj << Orient Shapes( state=0|1 )

Description: Orient the shape so that the top points in the direction of the movement.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year )
);
obj << Set Shape( "Triangle" );
obj << Orient Shapes( 1 );

Prev

Syntax: obj << Prev

Description: Moves the Time variable one step backward in the animation.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year )
);
dt << Select Where( (:Country == 3300) | (:Country == 4120) );
obj << Time Index( 19 );
obj << Prev;

Revert Color Theme

Syntax: obj << Revert Color Theme

Description: Reverts the custom color theme, returning to the default theme from column properties or preferences.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year ),
    Coloring( :Region )
);
obj << Color Theme( "White to Red" );
Wait( 2 );
obj << Revert Color Theme();

Selectable Across Gaps

Syntax: obj << Selectable Across Gaps( state=0|1 )

Description: Allows bubbles to be selectable and keeps the bubble selected during time periods where data is missing. When this option is off, bubbles are not selectable during time periods where data is missing.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year )
);
dt << Select Where( :Country == 3300 );
obj << Selectable Across Gaps( 1 );
obj << Trail Bubbles( 1 );
obj << Go;

Set Custom Path

Syntax: obj << Set Custom Path

Description: Set the custom path for the bubbles. The path can be specified with an N x 3 matrix or with a text representation. A path matrix has three columns for x, y, and flags for each point in the path. The flag values are 0 for control, 1 for move, 2 for line segment, 3 for cubic Bézier segment, and are negative if the point also closes the path. Path text supports SVG syntax.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Set Custom Path( "M-1,-1 L-1,1 L0,0.5 L1,1 L1,-1 L0,-0.5 L-1,-1 Z" );
obj << Set Shape( "Custom" );

Set Shape

Syntax: obj << Set Shape( "Circle"|"Triangle"|"Square"|"Diamond"|"Arrow"|"Custom" )

Description: Set the shape for the bubbles.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Set Shape( "Triangle" );

Show Roles

Syntax: obj << Show Roles( state=0|1 )

Description: Displays the variables used for each role in a legend across the top of the report.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year ),
    Coloring( :Region )
);
obj << Show Roles( 1 );

Show Time Annotation

Syntax: obj << Show Time Annotation( state=0|1 )

Description: Shows the current time as an annotation in an animated Bubble Plot. On by default.

JMP Version Added: 15

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year ),
    Coloring( :Region )
);
Wait( 1 );
obj << Show Time Annotation( 0 );

Size as Sum

Syntax: obj << Size as Sum( state=0|1 )

Description: Uses the sum of the Size variable rather than the mean of the Size variable as the Size role. On by default.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Size as Sum( 1 );

Speed

Syntax: obj << Speed( number )

Description: Changes the speed of the bubble movement over time.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year )
);
dt << Select Where( (:Country == 3300) | (:Country == 4120) );
obj << Speed( 100 );
obj << Go;

Split

Syntax: obj << Split( <id> )

Description: Splits the selected bubble (or given ID) into its constituent parts. This option is only available when two ID variables are used.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Region, :Country ),
    Time( :Year )
);
dt << Select Where( :Region == "Europe" );
Wait( 2 );
obj << Split;
Wait( 2 );
obj << Split( "Asia" );

Split All

Syntax: obj << Split All

Description: Splits all bubbles into their constituent parts. This option is only available when two ID variables are used.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Region, :Country ),
    Time( :Year )
);
Wait( 2 );
obj << Split All;

Step

Syntax: obj << Step

Description: Moves the Time variable one step forward in the animation.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year )
);
dt << Select Where( (:Country == 3300) | (:Country == 4120) );
obj << Step;

Stop

Syntax: obj << Stop

Description: Stops the animation when a Time variable is used.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year )
);
dt << Select Where( :Country == 4120 );
obj << Go;
Wait( 2 );
obj << Stop;

Time Index

Syntax: obj << Time Index( number )

Description: Sets the value of the Time variable on the scatterplot.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year )
);
obj << Time Index( 19 );

Title Position

Syntax: obj << Title Position( X,Y )

Description: Sets the position of the title. A Time variable must be specified to see this option.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year )
);
obj << Title Position( 0.8, 0.06 );

Toggle Animation

Syntax: obj << Toggle Animation

Description: Toggles the current animation state

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year )
);
dt << Select Where( :Country == 4120 );
obj << Go;
Wait( 2 );
obj << Toggle Animation;

Trail Bubbles

Syntax: obj << Trail Bubbles( "None"|"Selected"|"All" )

Description: Shows the past history of bubbles as a semi-transparent trail. To show trail bubbles, a Time column must be specified and a bubble must first be selected.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year )
);
dt << Select Where( (:Country == 3300) | (:Country == 4120) );
obj << Trail Bubbles( 1 );
obj << Go;

Trail Lines

Syntax: obj << Trail Lines( "None"|"Selected"|"All" )

Description: Shows the past history of bubbles as connected line segments. To show trail bubbles, a Time column must be specified and a bubble must first be selected.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    Time( :Year )
);
dt << Select Where( (:Country == 3300) | (:Country == 4120) );
obj << Trail Lines( 1 );
obj << Go;

X as Sum

Syntax: obj << X as Sum( state=0|1 )

Description: Uses the sum of the X variable rather than the mean of the X variable as the X role.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << X as Sum( 1 );

Y as Sum

Syntax: obj << Y as Sum( state=0|1 )

Description: Uses the sum of the Y variable rather than the mean of the Y variable as the Y role.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Y as Sum( 1 );

Shared Item Messages

Action

Syntax: obj << Action

Description: All-purpose trapdoor within a platform to insert expressions to evaluate. Temporarily sets the DisplayBox and DataTable contexts to the Platform.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Bivariate(
    Y( :height ),
    X( :weight ),
    Action( Distribution( Y( :height, :weight ), Histograms Only ) )
);

Apply Preset

Syntax: Apply Preset( preset ); Apply Preset( source, label, <Folder( folder {, folder2, ...} )> )

Description: Apply a previously created preset to the object, updating the options and customizations to match the saved settings.

JMP Version Added: 18

Anonymous preset

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ), t Test( 1 ) );
preset = obj << New Preset();
dt2 = Open( "$SAMPLE_DATA/Dogs.jmp" );
obj2 = dt2 << Oneway( Y( :LogHist0 ), X( :drug ) );
Wait( 1 );
obj2 << Apply Preset( preset );

Search by name

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ) );
Wait( 1 );
obj << Apply Preset( "Sample Presets", "Compare Distributions" );

Search within folder(s)

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ) );
Wait( 1 );
obj << Apply Preset( "Sample Presets", "t-Tests", Folder( "Compare Means" ) );

Automatic Recalc

Syntax: obj << Automatic Recalc( state=0|1 )

Description: Redoes the analysis automatically for exclude and data changes. If the Automatic Recalc option is turned on, you should consider using Wait(0) commands to ensure that the exclude and data changes take effect before the recalculation.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Automatic Recalc( 1 );
dt << Select Rows( 5 ) << Exclude( 1 );

Broadcast

Syntax: obj << Broadcast(message)

Description: Broadcasts a message to a platform. If return results from individual objects are tables, they are concatenated if possible, and the final format is identical to either the result from the Save Combined Table option in a Table Box or the result from the Concatenate option using a Source column. Other than those, results are stored in a list and returned.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Quality Control/Diameter.jmp" );
objs = Control Chart Builder(
    Variables( Subgroup( :DAY ), Y( :DIAMETER ) ),
    By( :OPERATOR )
);
objs[1] << Broadcast( Save Summaries );

Column Switcher

Syntax: obj << Column Switcher(column reference, {column reference, ...}, < Title(title) >, < Close Outline(0|1) >, < Retain Axis Settings(0|1) >, < Layout(0|1) >)

Description: Adds a control panel for changing the platform's variables

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
obj = dt << Contingency( Y( :size ), X( :marital status ) );
ColumnSwitcherObject = obj << Column Switcher(
    :marital status,
    {:sex, :country, :marital status}
);

Copy ByGroup Script

Syntax: obj << Copy ByGroup Script

Description: Create a JSL script to produce this analysis, and put it on the clipboard.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    By( _bycol )
);
obj[1] << Copy ByGroup Script;

Copy Script

Syntax: obj << Copy Script

Description: Create a JSL script to produce this analysis, and put it on the clipboard.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Copy Script;

Data Table Window

Syntax: obj << Data Table Window

Description: Move the data table window for this analysis to the front.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Data Table Window;

Get By Levels

Syntax: obj << Get By Levels

Description: Returns an associative array mapping the by group columns to their values.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( X( :height ), Y( :weight ), By( :sex ) );
biv << Get By Levels;

Get ByGroup Script

Syntax: obj << Get ByGroup Script

Description: Creates a script (JSL) to produce this analysis and returns it as an expression.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    By( _bycol )
);
t = obj[1] << Get ByGroup Script;
Show( t );

Get Container

Syntax: obj << Get Container

Description: Returns a reference to the container box that holds the content for the object.

General

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
t = obj << Get Container;
Show( (t << XPath( "//OutlineBox" )) << Get Title );

Platform with Filter

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
gb = Graph Builder(
    Show Control Panel( 0 ),
    Variables( X( :height ), Y( :weight ) ),
    Elements( Points( X, Y, Legend( 1 ) ), Smoother( X, Y, Legend( 2 ) ) ),
    Local Data Filter(
        Add Filter(
            columns( :age, :sex, :height ),
            Where( :age == {12, 13, 14} ),
            Where( :sex == "F" ),
            Where( :height >= 55 ),
            Display( :age, N Items( 6 ) )
        )
    )
);
New Window( "platform boxes",
    H List Box(
        Outline Box( "Report(platform)", Report( gb ) << Get Picture ),
        Outline Box( "platform << Get Container", (gb << Get Container) << Get Picture )
    )
);

Get Data Table

Syntax: obj << Get Data Table

Description: Returns a reference to the data table.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
t = obj << Get Datatable;
Show( N Rows( t ) );

Get Group Platform

Syntax: obj << Get Group Platform

Description: Return the Group Platform object if this platform is part of a Group. Otherwise, returns Empty().

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( Y( :weight ), X( :height ), By( :sex ) );
group = biv[1] << Get Group Platform;
Wait( 1 );
group << Layout( "Arrange in Tabs" );

Get Script

Syntax: obj << Get Script

Description: Creates a script (JSL) to produce this analysis and returns it as an expression.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
t = obj << Get Script;
Show( t );

Get Script With Data Table

Syntax: obj << Get Script With Data Table

Description: Creates a script(JSL) to produce this analysis specifically referencing this data table and returns it as an expression.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
t = obj << Get Script With Data Table;
Show( t );

Get Timing

Syntax: obj << Get Timing

Description: Times the platform launch.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
t = obj << Get Timing;
Show( t );

Get Web Support

Syntax: obj << Get Web Support

Description: Return a number indicating the level of Interactive HTML support for the display object. 1 means some or all elements are supported. 0 means no support.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Bivariate( Y( :Weight ), X( :Height ) );
s = obj << Get Web Support();
Show( s );

Get Where Expr

Syntax: obj << Get Where Expr

Description: Returns the Where expression for the data subset, if the platform was launched with By() or Where(). Otherwise, returns Empty()

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( X( :height ), Y( :weight ), By( :sex ) );
biv2 = dt << Bivariate( X( :height ), Y( :weight ), Where( :age < 14 & :height > 60 ) );
Show( biv[1] << Get Where Expr, biv2 << Get Where Expr );

Ignore Platform Preferences

Syntax: Ignore Platform Preferences( state=0|1 )

Description: Ignores the current settings of the platform's preferences. The message is ignored when sent to the platform after creation.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Bivariate(
    Ignore Platform Preferences( 1 ),
    Y( :height ),
    X( :weight ),
    Action( Distribution( Y( :height, :weight ), Histograms Only ) )
);

Local Data Filter

Syntax: obj << Local Data Filter

Description: To filter data to specific groups or ranges, but local to this platform

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
dt << Distribution(
    Nominal Distribution( Column( :country ) ),
    Local Data Filter(
        Add Filter( columns( :sex ), Where( :sex == "Female" ) ),
        Mode( Show( 1 ), Include( 1 ) )
    )
);

New JSL Preset

Syntax: New JSL Preset( preset )

Description: For testing purposes, create a preset directly from a JSL expression. Like <<New Preset, it will return a Platform Preset that can be applied using <<Apply Preset. But it allows you to specify the full JSL expression for the preset to test outside of normal operation. You will get an Assert on apply if the platform names do not match, but that is expected.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :Height ), X( :Age ) );
preset = obj << New JSL Preset( Oneway( Y( :A ), X( :B ), Each Pair( 1 ) ) );
Wait( 1 );
obj << Apply Preset( preset );

New Preset

Syntax: obj = New Preset()

Description: Create an anonymous preset representing the options and customizations applied to the object. This object can be passed to Apply Preset to copy the settings to another object of the same type.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ), t Test( 1 ) );
preset = obj << New Preset();

Paste Local Data Filter

Syntax: obj << Paste Local Data Filter

Description: Apply the local data filter from the clipboard to the current report.

dt = Open( "$SAMPLE_DATA/Cities.jmp" );
dist = Distribution( Continuous Distribution( Column( :POP ) ) );
filter = dist << Local Data Filter(
    Add Filter( columns( :Region ), Where( :Region == "MW" ) )
);
filter << Copy Local Data Filter;
dist2 = Distribution( Continuous Distribution( Column( :Lead ) ) );
Wait( 1 );
dist2 << Paste Local Data Filter;

Redo Analysis

Syntax: obj << Redo Analysis

Description: Rerun this same analysis in a new window. The analysis will be different if the data has changed.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Redo Analysis;

Redo ByGroup Analysis

Syntax: obj << Redo ByGroup Analysis

Description: Rerun this same analysis in a new window. The analysis will be different if the data has changed.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    By( _bycol )
);
obj[1] << Redo ByGroup Analysis;

Relaunch Analysis

Syntax: obj << Relaunch Analysis

Description: Opens the platform launch window and recalls the settings that were used to create the report.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Relaunch Analysis;

Relaunch ByGroup

Syntax: obj << Relaunch ByGroup

Description: Opens the platform launch window and recalls the settings that were used to create the report.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    By( _bycol )
);
obj[1] << Relaunch ByGroup;

Remove Column Switcher

Syntax: obj << Remove Column Switcher

Description: Removes the most recent Column Switcher that has been added to the platform.

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
obj = dt << Contingency( Y( :size ), X( :marital status ) );
ColumnSwitcherObject = obj << Column Switcher(
    :marital status,
    {:sex, :country, :marital status}
);
Wait( 2 );
obj << Remove Column Switcher;

Remove Local Data Filter

Syntax: obj << Remove Local Data Filter

Description: If a local data filter has been created, this removes it and restores the platform to use all the data in the data table directly

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
dist = dt << Distribution(
    Nominal Distribution( Column( :country ) ),
    Local Data Filter(
        Add Filter( columns( :sex ), Where( :sex == "Female" ) ),
        Mode( Show( 1 ), Include( 1 ) )
    )
);
Wait( 2 );
dist << remove local data filter;

Render Preset

Syntax: Render Preset( preset )

Description: For testing purposes, show the platform rerun script that would be used when applying a platform preset to the platform in the log. No changes are made to the platform.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :Height ), X( :Age ) );
obj << Render Preset( Expr( Oneway( Y( :A ), X( :B ), Each Pair( 1 ) ) ) );

Report

Syntax: obj << Report;Report( obj )

Description: Returns a reference to the report object.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
r = obj << Report;
t = r[Outline Box( 1 )] << Get Title;
Show( t );

Report View

Syntax: obj << Report View( "Full"|"Summary" )

Description: The report view determines the level of detail visible in a platform report. Full shows all of the detail, while Summary shows only select content, dependent on the platform. For customized behavior, display boxes support a <<Set Summary Behavior message.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Report View( "Summary" );

Save ByGroup Script to Data Table

Syntax: Save ByGroup Script to Data Table( <name>, < <<Append Suffix(0|1)>, < <<Prompt(0|1)>, < <<Replace(0|1)> );

Description: Creates a JSL script to produce this analysis, and save it as a table property in the data table. You can specify a name for the script. The Append Suffix option appends a numeric suffix to the script name, which differentiates the script from an existing script with the same name. The Prompt option prompts the user to specify a script name. The Replace option replaces an existing script with the same name.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    By( _bycol )
);
obj[1] << Save ByGroup Script to Data Table;

Save ByGroup Script to Journal

Syntax: obj << Save ByGroup Script to Journal

Description: Create a JSL script to produce this analysis, and add a Button to the journal containing this script.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    By( _bycol )
);
obj[1] << Save ByGroup Script to Journal;

Save ByGroup Script to Script Window

Syntax: obj << Save ByGroup Script to Script Window

Description: Create a JSL script to produce this analysis, and append it to the current Script text window.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    By( _bycol )
);
obj[1] << Save ByGroup Script to Script Window;

Save Script for All Objects

Syntax: obj << Save Script for All Objects

Description: Creates a script for all report objects in the window and appends it to the current Script window. This option is useful when you have multiple reports in the window.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Save Script for All Objects;

Save Script for All Objects To Data Table

Syntax: obj << Save Script for All Objects To Data Table( <name> )

Description: Saves a script for all report objects to the current data table. This option is useful when you have multiple reports in the window. The script is named after the first platform unless you specify the script name in quotes.

Example 1

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    By( _bycol )
);
obj[1] << Save Script for All Objects To Data Table;

Example 2

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country ),
    By( _bycol )
);
obj[1] << Save Script for All Objects To Data Table( "My Script" );

Save Script to Data Table

Syntax: Save Script to Data Table( <name>, < <<Prompt(0|1)>, < <<Replace(0|1)> );

Description: Create a JSL script to produce this analysis, and save it as a table property in the data table.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Save Script to Data Table( "My Analysis", <<Prompt( 0 ), <<Replace( 0 ) );

Save Script to Journal

Syntax: obj << Save Script to Journal

Description: Create a JSL script to produce this analysis, and add a Button to the journal containing this script.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Save Script to Journal;

Save Script to Report

Syntax: obj << Save Script to Report

Description: Create a JSL script to produce this analysis, and show it in the report itself. Useful to preserve a printed record of what was done.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Save Script to Report;

Save Script to Script Window

Syntax: obj << Save Script to Script Window

Description: Create a JSL script to produce this analysis, and append it to the current Script text window.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Save Script to Script Window;

SendToByGroup

Syntax: SendToByGroup( {":Column == level"}, command );

Description: Sends platform commands or display customization commands to each level of a by-group.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Distribution(
    By( :Sex ),
    SendToByGroup(
        {:sex == "F"},
        Continuous Distribution( Column( :weight ), Normal Quantile Plot( 1 ) )
    ),
    SendToByGroup( {:sex == "M"}, Continuous Distribution( Column( :weight ) ) )
);

SendToEmbeddedScriptable

Syntax: SendToEmbeddedScriptable( Dispatch( "Outline name", "Element name", command );

Description: SendToEmbeddedScriptable restores settings of embedded scriptable objects.

dt = Open( "$SAMPLE_DATA/Reliability/Fan.jmp" );
dt << Life Distribution(
    Y( :Time ),
    Censor( :Censor ),
    Censor Code( 1 ),
    <<Fit Weibull,
    SendToEmbeddedScriptable(
        Dispatch(
            {"Statistics", "Parametric Estimate - Weibull", "Profilers", "Density Profiler"},
            {1, Confidence Intervals( 0 ), Term Value( Time( 6000, Lock( 0 ), Show( 1 ) ) )}
        )
    )
);

SendToReport

Syntax: SendToReport( Dispatch( "Outline name", "Element name", Element type, command );

Description: Send To Report is used in tandem with the Dispatch command to customize the appearance of a report.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Distribution(
    Nominal Distribution( Column( :age ) ),
    Continuous Distribution( Column( :weight ) ),
    SendToReport( Dispatch( "age", "Distrib Nom Hist", FrameBox, {Frame Size( 178, 318 )} ) )
);

Sync to Data Table Changes

Syntax: obj << Sync to Data Table Changes

Description: Sync with the exclude and data changes that have been made.

dt = Open( "$SAMPLE_DATA/Cities.jmp" );
dist = Distribution( Continuous Distribution( Column( :POP ) ) );
Wait( 1 );
dt << Delete Rows( dt << Get Rows Where( :Region == "W" ) );
dist << Sync To Data Table Changes;

Title

Syntax: obj << Title( "new title" )

Description: Sets the title of the platform.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
obj << Title( "My Platform" );

Top Report

Syntax: obj << Top Report

Description: Returns a reference to the root node in the report.

dt = Open( "$SAMPLE_DATA/PopAgeGroup.jmp" );
obj = dt << Bubble Plot(
    X( :"Portion 0-19"n ),
    Y( :"Portion60+"n ),
    Sizes( :Pop ),
    ID( :Country )
);
r = obj << Top Report;
t = r[Outline Box( 1 )] << Get Title;
Show( t );

Transform Column

Syntax: obj = <Platform>(... Transform Column(<name>, Formula(<expression>), [Random Seed(<n>)], [Numeric|Character|Expression], [Continuous|Nominal|Ordinal|Unstructured Text], [column properties]) ...)

Description: Create a transform column in the local context of an object, usually a platform. The transform column is active only for the lifetime of the platform.

JMP Version Added: 16

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Distribution(
    Transform Column( "age^2", Format( "Fixed Dec", 5, 0 ), Formula( :age * :age ) ),
    Continuous Distribution( Column( :"age^2"n ) )
);

View Web XML

Syntax: obj << View Web XML

Description: Returns the XML code that is used to create the interactive HTML report.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Bivariate( Y( :Weight ), X( :Height ) );
xml = obj << View Web XML;

Window View

Syntax: obj = Bubble Plot(...Window View( "Visible"|"Invisible"|"Private" )...)

Description: Set the type of the window to be created for the report. By default a Visible report window will be created. An Invisible window will not appear on screen, but is discoverable by functions such as Window(). A Private window responds to most window messages but is not discoverable and must be addressed through the report object

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( Window View( "Private" ), Y( :weight ), X( :height ), Fit Line );
eqn = Report( biv )["Linear Fit", Text Edit Box( 1 )] << Get Text;
biv << Close Window;
New Window( "Bivariate Equation",
    Outline Box( "Big Class Linear Fit", Text Box( eqn, <<Set Base Font( "Title" ) ) )
);