Type 1 Gauge

Associated Constructors

Type 1 Gauge

Syntax: Type 1 Gauge( Y( column ) )

Description: Analyzes measurement systems using the Type 1 Gauge method to evaluate the repeatability and bias of a measurement process on one reference part.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);

Columns

By

Syntax: obj = Type 1 Gauge(...<By( column(s) )>...)

Description: Performs a separate analysis for each level of the specified column.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Type 1 Gauge(
    Y( :Y1 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) )
    ),
    By( _bycol )
);

Freq

Syntax: obj = Type 1 Gauge(...<Freq( column )>...)

Description: Specifies a column whose values assign a frequency to each row for the analysis.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
dt << New Column( "_freqcol", Numeric, Continuous, Formula( Random Integer( 1, 5 ) ) );
obj = dt << Type 1 Gauge(
    Y( :Y1 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) )
    ),
    Freq( _freqcol )
);

Measurement

Syntax: obj = Type 1 Gauge(...Measurement( column(s) )...)

Description: Specifies the continuous column(s) of measurements.

Example 1

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);

Example 2

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Measurement( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);

Y

Syntax: obj = Type 1 Gauge(...Y( column(s) )...)

Description: Specifies the continuous column(s) of measurements.

Example 1

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);

Example 2

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Measurement( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);

Item Messages

Percent of Tolerance

Syntax: obj = Type 1 Gauge(...Percent of Tolerance( number=20 )...)

Description: Changes the percent of part tolerance used to compare against the measurement variation. "20" by default.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    ),
    Percent of Tolerance( 10 )
);

Save Type 1 Gauge Metadata as Column Properties

Syntax: obj << Save Type 1 Gauge Metadata as Column Properties

Description: For each column of measurement data, saves the Type 1 Gauge metadata as an MSA Metadata column property within the column of the original data table.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2.5 ), Reference( 50.014 ), Resolution( .01 ) ),
        :Y2( Tolerance Range( 10 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 3 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << Save Type 1 Gauge Metadata as Column Properties;

Save Type 1 Gauge Metadata to Table

Syntax: obj << Save Type 1 Gauge Metadata to Table

Description: Creates a new data table that contains the Type 1 Gauge metadata for each column of measurement data. The table is in a tall format and contains a row for each measurement variable.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << Save Type 1 Gauge Metadata to Table;

Set Alpha Level

Syntax: obj = Type 1 Gauge(...Set Alpha Level( number=.05 )...)

Description: Specifies the alpha level that is used in the Bias Test. ".05" by default.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    ),
    Type 1 Gauge Analysis( "Y1", Bias Test( 1 ) ),
    Type 1 Gauge Analysis( "Y2", Bias Test( 1 ) ),
    Type 1 Gauge Analysis( "Y3", Bias Test( 1 ) ),
    Set Alpha Level( .01 )
);

Sigma Multiplier

Syntax: obj = Type 1 Gauge(...Sigma Multiplier( number=6 )...)

Description: Specifies a constant value that is multiplied by sigma. "6" by default.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    ),
    Sigma Multiplier( 4 )
);

Type 1 Gauge Analysis

Syntax: obj << Type 1 Gauge Analysis

Description: Specifies the Type 1 Gauge Analysis report options for each measurement response.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    ),
    Type 1 Gauge Analysis( "Y1", Histogram( 1 ) ),
    Type 1 Gauge Analysis( "Y2", Run Chart( 1, Show Mean( 1 ) ) ),
    Type 1 Gauge Analysis( "Y3", Histogram( 1, Show Count Axis( 1 ) ) )
);

Shared Item Messages

Action

Syntax: obj << Action

Description: All-purpose trapdoor within a platform to insert expressions to evaluate. Temporarily sets the DisplayBox and DataTable contexts to the Platform.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Bivariate(
    Y( :height ),
    X( :weight ),
    Action( Distribution( Y( :height, :weight ), Histograms Only ) )
);

Apply Preset

Syntax: Apply Preset( preset ); Apply Preset( source, label, <Folder( folder {, folder2, ...} )> )

Description: Apply a previously created preset to the object, updating the options and customizations to match the saved settings.

JMP Version Added: 18

Anonymous preset

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ), t Test( 1 ) );
preset = obj << New Preset();
dt2 = Open( "$SAMPLE_DATA/Dogs.jmp" );
obj2 = dt2 << Oneway( Y( :LogHist0 ), X( :drug ) );
Wait( 1 );
obj2 << Apply Preset( preset );

Search by name

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ) );
Wait( 1 );
obj << Apply Preset( "Sample Presets", "Compare Distributions" );

Search within folder(s)

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ) );
Wait( 1 );
obj << Apply Preset( "Sample Presets", "t-Tests", Folder( "Compare Means" ) );

Automatic Recalc

Syntax: obj << Automatic Recalc( state=0|1 )

Description: Redoes the analysis automatically for exclude and data changes. If the Automatic Recalc option is turned on, you should consider using Wait(0) commands to ensure that the exclude and data changes take effect before the recalculation.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << Automatic Recalc( 1 );
dt << Select Rows( 5 ) << Exclude( 1 );

Broadcast

Syntax: obj << Broadcast(message)

Description: Broadcasts a message to a platform. If return results from individual objects are tables, they are concatenated if possible, and the final format is identical to either the result from the Save Combined Table option in a Table Box or the result from the Concatenate option using a Source column. Other than those, results are stored in a list and returned.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Quality Control/Diameter.jmp" );
objs = Control Chart Builder(
    Variables( Subgroup( :DAY ), Y( :DIAMETER ) ),
    By( :OPERATOR )
);
objs[1] << Broadcast( Save Summaries );

Column Switcher

Syntax: obj << Column Switcher(column reference, {column reference, ...}, < Title(title) >, < Close Outline(0|1) >, < Retain Axis Settings(0|1) >, < Layout(0|1) >)

Description: Adds a control panel for changing the platform's variables

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
obj = dt << Contingency( Y( :size ), X( :marital status ) );
ColumnSwitcherObject = obj << Column Switcher(
    :marital status,
    {:sex, :country, :marital status}
);

Copy ByGroup Script

Syntax: obj << Copy ByGroup Script

Description: Create a JSL script to produce this analysis, and put it on the clipboard.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    ),
    By( _bycol )
);
obj[1] << Copy ByGroup Script;

Copy Script

Syntax: obj << Copy Script

Description: Create a JSL script to produce this analysis, and put it on the clipboard.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << Copy Script;

Data Table Window

Syntax: obj << Data Table Window

Description: Move the data table window for this analysis to the front.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << Data Table Window;

Get By Levels

Syntax: obj << Get By Levels

Description: Returns an associative array mapping the by group columns to their values.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( X( :height ), Y( :weight ), By( :sex ) );
biv << Get By Levels;

Get ByGroup Script

Syntax: obj << Get ByGroup Script

Description: Creates a script (JSL) to produce this analysis and returns it as an expression.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    ),
    By( _bycol )
);
t = obj[1] << Get ByGroup Script;
Show( t );

Get Container

Syntax: obj << Get Container

Description: Returns a reference to the container box that holds the content for the object.

General

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
t = obj << Get Container;
Show( (t << XPath( "//OutlineBox" )) << Get Title );

Platform with Filter

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
gb = Graph Builder(
    Show Control Panel( 0 ),
    Variables( X( :height ), Y( :weight ) ),
    Elements( Points( X, Y, Legend( 1 ) ), Smoother( X, Y, Legend( 2 ) ) ),
    Local Data Filter(
        Add Filter(
            columns( :age, :sex, :height ),
            Where( :age == {12, 13, 14} ),
            Where( :sex == "F" ),
            Where( :height >= 55 ),
            Display( :age, N Items( 6 ) )
        )
    )
);
New Window( "platform boxes",
    H List Box(
        Outline Box( "Report(platform)", Report( gb ) << Get Picture ),
        Outline Box( "platform << Get Container", (gb << Get Container) << Get Picture )
    )
);

Get Data Table

Syntax: obj << Get Data Table

Description: Returns a reference to the data table.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
t = obj << Get Datatable;
Show( N Rows( t ) );

Get Group Platform

Syntax: obj << Get Group Platform

Description: Return the Group Platform object if this platform is part of a Group. Otherwise, returns Empty().

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( Y( :weight ), X( :height ), By( :sex ) );
group = biv[1] << Get Group Platform;
Wait( 1 );
group << Layout( "Arrange in Tabs" );

Get Script

Syntax: obj << Get Script

Description: Creates a script (JSL) to produce this analysis and returns it as an expression.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
t = obj << Get Script;
Show( t );

Get Script With Data Table

Syntax: obj << Get Script With Data Table

Description: Creates a script(JSL) to produce this analysis specifically referencing this data table and returns it as an expression.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
t = obj << Get Script With Data Table;
Show( t );

Get Timing

Syntax: obj << Get Timing

Description: Times the platform launch.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
t = obj << Get Timing;
Show( t );

Get Web Support

Syntax: obj << Get Web Support

Description: Return a number indicating the level of Interactive HTML support for the display object. 1 means some or all elements are supported. 0 means no support.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Bivariate( Y( :Weight ), X( :Height ) );
s = obj << Get Web Support();
Show( s );

Get Where Expr

Syntax: obj << Get Where Expr

Description: Returns the Where expression for the data subset, if the platform was launched with By() or Where(). Otherwise, returns Empty()

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( X( :height ), Y( :weight ), By( :sex ) );
biv2 = dt << Bivariate( X( :height ), Y( :weight ), Where( :age < 14 & :height > 60 ) );
Show( biv[1] << Get Where Expr, biv2 << Get Where Expr );

Ignore Platform Preferences

Syntax: Ignore Platform Preferences( state=0|1 )

Description: Ignores the current settings of the platform's preferences. The message is ignored when sent to the platform after creation.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Bivariate(
    Ignore Platform Preferences( 1 ),
    Y( :height ),
    X( :weight ),
    Action( Distribution( Y( :height, :weight ), Histograms Only ) )
);

Local Data Filter

Syntax: obj << Local Data Filter

Description: To filter data to specific groups or ranges, but local to this platform

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
dt << Distribution(
    Nominal Distribution( Column( :country ) ),
    Local Data Filter(
        Add Filter( columns( :sex ), Where( :sex == "Female" ) ),
        Mode( Show( 1 ), Include( 1 ) )
    )
);

New JSL Preset

Syntax: New JSL Preset( preset )

Description: For testing purposes, create a preset directly from a JSL expression. Like <<New Preset, it will return a Platform Preset that can be applied using <<Apply Preset. But it allows you to specify the full JSL expression for the preset to test outside of normal operation. You will get an Assert on apply if the platform names do not match, but that is expected.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :Height ), X( :Age ) );
preset = obj << New JSL Preset( Oneway( Y( :A ), X( :B ), Each Pair( 1 ) ) );
Wait( 1 );
obj << Apply Preset( preset );

New Preset

Syntax: obj = New Preset()

Description: Create an anonymous preset representing the options and customizations applied to the object. This object can be passed to Apply Preset to copy the settings to another object of the same type.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :height ), X( :sex ), t Test( 1 ) );
preset = obj << New Preset();

Paste Local Data Filter

Syntax: obj << Paste Local Data Filter

Description: Apply the local data filter from the clipboard to the current report.

dt = Open( "$SAMPLE_DATA/Cities.jmp" );
dist = Distribution( Continuous Distribution( Column( :POP ) ) );
filter = dist << Local Data Filter(
    Add Filter( columns( :Region ), Where( :Region == "MW" ) )
);
filter << Copy Local Data Filter;
dist2 = Distribution( Continuous Distribution( Column( :Lead ) ) );
Wait( 1 );
dist2 << Paste Local Data Filter;

Redo Analysis

Syntax: obj << Redo Analysis

Description: Rerun this same analysis in a new window. The analysis will be different if the data has changed.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << Redo Analysis;

Redo ByGroup Analysis

Syntax: obj << Redo ByGroup Analysis

Description: Rerun this same analysis in a new window. The analysis will be different if the data has changed.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    ),
    By( _bycol )
);
obj[1] << Redo ByGroup Analysis;

Relaunch Analysis

Syntax: obj << Relaunch Analysis

Description: Opens the platform launch window and recalls the settings that were used to create the report.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << Relaunch Analysis;

Relaunch ByGroup

Syntax: obj << Relaunch ByGroup

Description: Opens the platform launch window and recalls the settings that were used to create the report.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    ),
    By( _bycol )
);
obj[1] << Relaunch ByGroup;

Remove Column Switcher

Syntax: obj << Remove Column Switcher

Description: Removes the most recent Column Switcher that has been added to the platform.

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
obj = dt << Contingency( Y( :size ), X( :marital status ) );
ColumnSwitcherObject = obj << Column Switcher(
    :marital status,
    {:sex, :country, :marital status}
);
Wait( 2 );
obj << Remove Column Switcher;

Remove Local Data Filter

Syntax: obj << Remove Local Data Filter

Description: If a local data filter has been created, this removes it and restores the platform to use all the data in the data table directly

dt = Open( "$SAMPLE_DATA/Car Poll.jmp" );
dist = dt << Distribution(
    Nominal Distribution( Column( :country ) ),
    Local Data Filter(
        Add Filter( columns( :sex ), Where( :sex == "Female" ) ),
        Mode( Show( 1 ), Include( 1 ) )
    )
);
Wait( 2 );
dist << remove local data filter;

Render Preset

Syntax: Render Preset( preset )

Description: For testing purposes, show the platform rerun script that would be used when applying a platform preset to the platform in the log. No changes are made to the platform.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Oneway( Y( :Height ), X( :Age ) );
obj << Render Preset( Expr( Oneway( Y( :A ), X( :B ), Each Pair( 1 ) ) ) );

Report

Syntax: obj << Report;Report( obj )

Description: Returns a reference to the report object.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
r = obj << Report;
t = r[Outline Box( 1 )] << Get Title;
Show( t );

Report View

Syntax: obj << Report View( "Full"|"Summary" )

Description: The report view determines the level of detail visible in a platform report. Full shows all of the detail, while Summary shows only select content, dependent on the platform. For customized behavior, display boxes support a <<Set Summary Behavior message.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << Report View( "Summary" );

Save ByGroup Script to Data Table

Syntax: Save ByGroup Script to Data Table( <name>, < <<Append Suffix(0|1)>, < <<Prompt(0|1)>, < <<Replace(0|1)> );

Description: Creates a JSL script to produce this analysis, and save it as a table property in the data table. You can specify a name for the script. The Append Suffix option appends a numeric suffix to the script name, which differentiates the script from an existing script with the same name. The Prompt option prompts the user to specify a script name. The Replace option replaces an existing script with the same name.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    ),
    By( _bycol )
);
obj[1] << Save ByGroup Script to Data Table;

Save ByGroup Script to Journal

Syntax: obj << Save ByGroup Script to Journal

Description: Create a JSL script to produce this analysis, and add a Button to the journal containing this script.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    ),
    By( _bycol )
);
obj[1] << Save ByGroup Script to Journal;

Save ByGroup Script to Script Window

Syntax: obj << Save ByGroup Script to Script Window

Description: Create a JSL script to produce this analysis, and append it to the current Script text window.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    ),
    By( _bycol )
);
obj[1] << Save ByGroup Script to Script Window;

Save Script for All Objects

Syntax: obj << Save Script for All Objects

Description: Creates a script for all report objects in the window and appends it to the current Script window. This option is useful when you have multiple reports in the window.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << Save Script for All Objects;

Save Script for All Objects To Data Table

Syntax: obj << Save Script for All Objects To Data Table( <name> )

Description: Saves a script for all report objects to the current data table. This option is useful when you have multiple reports in the window. The script is named after the first platform unless you specify the script name in quotes.

Example 1

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    ),
    By( _bycol )
);
obj[1] << Save Script for All Objects To Data Table;

Example 2

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
dt << New Column( "_bycol",
    Character,
    Nominal,
    set values( Repeat( {"A", "B"}, N Rows( dt ) )[1 :: N Rows( dt )] )
);
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    ),
    By( _bycol )
);
obj[1] << Save Script for All Objects To Data Table( "My Script" );

Save Script to Data Table

Syntax: Save Script to Data Table( <name>, < <<Prompt(0|1)>, < <<Replace(0|1)> );

Description: Create a JSL script to produce this analysis, and save it as a table property in the data table.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << Save Script to Data Table( "My Analysis", <<Prompt( 0 ), <<Replace( 0 ) );

Save Script to Journal

Syntax: obj << Save Script to Journal

Description: Create a JSL script to produce this analysis, and add a Button to the journal containing this script.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << Save Script to Journal;

Save Script to Report

Syntax: obj << Save Script to Report

Description: Create a JSL script to produce this analysis, and show it in the report itself. Useful to preserve a printed record of what was done.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << Save Script to Report;

Save Script to Script Window

Syntax: obj << Save Script to Script Window

Description: Create a JSL script to produce this analysis, and append it to the current Script text window.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << Save Script to Script Window;

SendToByGroup

Syntax: SendToByGroup( {":Column == level"}, command );

Description: Sends platform commands or display customization commands to each level of a by-group.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Distribution(
    By( :Sex ),
    SendToByGroup(
        {:sex == "F"},
        Continuous Distribution( Column( :weight ), Normal Quantile Plot( 1 ) )
    ),
    SendToByGroup( {:sex == "M"}, Continuous Distribution( Column( :weight ) ) )
);

SendToEmbeddedScriptable

Syntax: SendToEmbeddedScriptable( Dispatch( "Outline name", "Element name", command );

Description: SendToEmbeddedScriptable restores settings of embedded scriptable objects.

dt = Open( "$SAMPLE_DATA/Reliability/Fan.jmp" );
dt << Life Distribution(
    Y( :Time ),
    Censor( :Censor ),
    Censor Code( 1 ),
    <<Fit Weibull,
    SendToEmbeddedScriptable(
        Dispatch(
            {"Statistics", "Parametric Estimate - Weibull", "Profilers", "Density Profiler"},
            {1, Confidence Intervals( 0 ), Term Value( Time( 6000, Lock( 0 ), Show( 1 ) ) )}
        )
    )
);

SendToReport

Syntax: SendToReport( Dispatch( "Outline name", "Element name", Element type, command );

Description: Send To Report is used in tandem with the Dispatch command to customize the appearance of a report.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Distribution(
    Nominal Distribution( Column( :age ) ),
    Continuous Distribution( Column( :weight ) ),
    SendToReport( Dispatch( "age", "Distrib Nom Hist", FrameBox, {Frame Size( 178, 318 )} ) )
);

Sync to Data Table Changes

Syntax: obj << Sync to Data Table Changes

Description: Sync with the exclude and data changes that have been made.

dt = Open( "$SAMPLE_DATA/Cities.jmp" );
dist = Distribution( Continuous Distribution( Column( :POP ) ) );
Wait( 1 );
dt << Delete Rows( dt << Get Rows Where( :Region == "W" ) );
dist << Sync To Data Table Changes;

Title

Syntax: obj << Title( "new title" )

Description: Sets the title of the platform.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << Title( "My Platform" );

Top Report

Syntax: obj << Top Report

Description: Returns a reference to the root node in the report.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
r = obj << Top Report;
t = r[Outline Box( 1 )] << Get Title;
Show( t );

Transform Column

Syntax: obj = <Platform>(... Transform Column(<name>, Formula(<expression>), [Random Seed(<n>)], [Numeric|Character|Expression], [Continuous|Nominal|Ordinal|Unstructured Text], [column properties]) ...)

Description: Create a transform column in the local context of an object, usually a platform. The transform column is active only for the lifetime of the platform.

JMP Version Added: 16

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
dt << Distribution(
    Transform Column( "age^2", Format( "Fixed Dec", 5, 0 ), Formula( :age * :age ) ),
    Continuous Distribution( Column( :"age^2"n ) )
);

View Web XML

Syntax: obj << View Web XML

Description: Returns the XML code that is used to create the interactive HTML report.

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
obj = dt << Bivariate( Y( :Weight ), X( :Height ) );
xml = obj << View Web XML;

Window View

Syntax: obj = Type 1 Gauge(...Window View( "Visible"|"Invisible"|"Private" )...)

Description: Set the type of the window to be created for the report. By default a Visible report window will be created. An Invisible window will not appear on screen, but is discoverable by functions such as Window(). A Private window responds to most window messages but is not discoverable and must be addressed through the report object

dt = Open( "$SAMPLE_DATA/Big Class.jmp" );
biv = dt << Bivariate( Window View( "Private" ), Y( :weight ), X( :height ), Fit Line );
eqn = Report( biv )["Linear Fit", Text Edit Box( 1 )] << Get Text;
biv << Close Window;
New Window( "Bivariate Equation",
    Outline Box( "Big Class Linear Fit", Text Box( eqn, <<Set Base Font( "Title" ) ) )
);

Type 1 Gauge Analysis > Type 1 Gauge Summary Statistics

Item Messages

Customize Summary and Capability Statistics

Syntax: obj << Customize Summary and Capability Statistics(statistic1( state=0|1 ), statistic2( state=0|1 ), ..., statisticN( state=0|1 )

Description: Customizes the summary statistics that are displayed in the Summary and Capability Statistics report.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1 ),
    Type 1 Gauge Metadata(
        :Y1(
            Lower Tolerance( 49.014 ),
            Upper Tolerance( 51.014 ),
            Reference( 50.014 ),
            Resolution( .001 )
        )
    )
);
obj << (Type 1 Gauge Analysis[1] <<
Summary and Capability Statistics(
    1,
    Customize Summary and Capability Statistics( Std Dev( 0 ), Bias( 0 ) )
));

Type 1 Gauge Analysis

Item Messages

Apply Preset

Syntax: Apply Preset( preset ); Apply Preset( source, label, <Folder( folder {, folder2, ...} )> )

Description: Apply a previously created preset to the object, updating the options and customizations to match the saved settings.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << (Type 1 Gauge Analysis[1] << Bias Test( 1 ));
Report( obj )["Type 1 Gauge Analysis for Y1", "Summary and Capability Statistics"] <<
Close( 1 );
preset = obj << (Type 1 Gauge Analysis[1] << New Preset);
Wait( 1 );
obj << (Type 1 Gauge Analysis[2] << Apply Preset( preset ));

Bias Test

Syntax: obj << (Type 1 Gauge Analysis[number] << Bias Test( state=0|1 ))

Description: Shows or hides a bias test of the mean of the observed measurements and the reference standard value in the Type 1 Gauge Analysis report.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1 ),
    Type 1 Gauge Metadata(
        :Y1(
            Lower Tolerance( 49.014 ),
            Upper Tolerance( 51.014 ),
            Reference( 50.014 ),
            Resolution( .001 )
        )
    )
);
Wait( 1 );
obj << (Type 1 Gauge Analysis[1] << Bias Test( 1 ));

Histogram

Syntax: obj << (Type 1 Gauge Analysis[number] << Histogram( state=0|1 ))

Description: Shows or hides a histogram of the measurement data in the Type 1 Gauge Analysis report.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1 ),
    Type 1 Gauge Metadata(
        :Y1(
            Lower Tolerance( 49.014 ),
            Upper Tolerance( 51.014 ),
            Reference( 50.014 ),
            Resolution( .001 )
        )
    )
);
Wait( 1 );
obj << (Type 1 Gauge Analysis[1] << Histogram( 1 ));

New Preset

Syntax: obj = New Preset()

Description: Create an anonymous preset representing the options and customizations applied to the object. This object can be passed to Apply Preset to copy the settings to another object of the same type.

JMP Version Added: 18

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1, :Y2, :Y3 ),
    Type 1 Gauge Metadata(
        :Y1( Tolerance Range( 2 ), Reference( 50.014 ), Resolution( .001 ) ),
        :Y2( Tolerance Range( 6 ), Reference( 24.9 ), Resolution( .01 ) ),
        :Y3( Tolerance Range( 5 ), Reference( 10 ), Resolution( .0005 ) )
    )
);
obj << (Type 1 Gauge Analysis[1] << Bias Test( 1 ));
Report( obj )["Type 1 Gauge Analysis for Y1", "Summary and Capability Statistics"] <<
Close( 1 );
preset = obj << (Type 1 Gauge Analysis[1] << New Preset);

Run Chart

Syntax: obj << (Type 1 Gauge Analysis[number] << Run Chart( state=0|1 ))

Description: Shows or hides the run chart of the measurement data in the Type 1 Gauge Analysis report. This chart shows the variation of the measurements with respect to the reference value and percent of tolerance range. On by default.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1 ),
    Type 1 Gauge Metadata(
        :Y1(
            Lower Tolerance( 49.014 ),
            Upper Tolerance( 51.014 ),
            Reference( 50.014 ),
            Resolution( .001 )
        )
    )
);
(obj << report)["Run Chart"] << Select;
Wait( 1 );
obj << (Type 1 Gauge Analysis[1] << Run Chart( 0 ));
Wait( 1 );
obj << (Type 1 Gauge Analysis[1] << Run Chart( 1 ));
Wait( 1 );
(obj << report)["Run Chart"] << Deselect;

Summary and Capability Statistics

Syntax: obj << ( Type 1 Gauge Analysis[number] << Summary and Capability Statistics( state=0|1 ))

Description: Shows or hides the Type 1 Gauge Summary and Capability Statistics table. On by default.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1 ),
    Type 1 Gauge Metadata(
        :Y1(
            Lower Tolerance( 49.014 ),
            Upper Tolerance( 51.014 ),
            Reference( 50.014 ),
            Resolution( .001 )
        )
    )
);
(obj << report)["Summary and Capability Statistics"] << Select;
Wait( 1 );
obj << (Type 1 Gauge Analysis[1] << Summary and Capability Statistics( 0 ));
Wait( 1 );
obj << (Type 1 Gauge Analysis[1] << Summary and Capability Statistics( 1 ));
Wait( 1 );
(obj << report)["Summary and Capability Statistics"] << Deselect;

Type 1 Gauge Histogram

Item Messages

Show Count Axis

Syntax: obj << (Type 1 Gauge Analysis[number] << Histogram(1, Show Count Axis( state=0|1 )))

Description: Shows or hides a count axis to the right of the histogram frame in the Type 1 Gauge Analysis report.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1 ),
    Type 1 Gauge Metadata(
        :Y1(
            Lower Tolerance( 49.014 ),
            Upper Tolerance( 51.014 ),
            Reference( 50.014 ),
            Resolution( .001 )
        )
    ),
    Type 1 Gauge Analysis( "Y1", Histogram( 1 ) )
);
Wait( 1 );
obj << (Type 1 Gauge Analysis[1] << Histogram( 1, Show Count Axis( 1 ) ));

Show Reference

Syntax: obj << (Type 1 Gauge Analysis[number] << Histogram(1, Show Reference( state=0|1 )))

Description: Shows or hides the reference line on the histogram in the Type 1 Gauge Analysis report. On by default.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1 ),
    Type 1 Gauge Metadata(
        :Y1(
            Lower Tolerance( 49.014 ),
            Upper Tolerance( 51.014 ),
            Reference( 50.014 ),
            Resolution( .001 )
        )
    ),
    Type 1 Gauge Analysis( "Y1", Histogram( 1 ) )
);
Wait( 1 );
obj << (Type 1 Gauge Analysis[1] << Histogram( 1, Show Reference( 0 ) ));
Wait( 1 );
obj << (Type 1 Gauge Analysis[1] << Histogram( 1, Show Reference( 1 ) ));
Wait( 1 );

Type 1 Gauge Run Chart

Item Messages

Show Mean

Syntax: obj << ( Type 1 Gauge Analysis[number] << Run Chart( 1, Show Mean( state=0|1 )))

Description: Shows or hides the mean line on the run chart in the Type 1 Gauge Analysis report.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y2 ),
    Type 1 Gauge Metadata(
        :Y2(
            Lower Tolerance( 21.90 ),
            Upper Tolerance( 27.90 ),
            Reference( 24.90 ),
            Resolution( .01 )
        )
    )
);
Wait( 1 );
obj << (Type 1 Gauge Analysis[1] << Run Chart( 1, Show Mean( 1 ) ));

Show Portion of Tolerance

Syntax: obj << ( Type 1 Gauge Analysis[number] << Run Chart( 1, Show Portion of Tolerance( state=0|1 )))

Description: Shows or hides the portion of tolerance lines on the run chart in the Type 1 Gauge Analysis report. On by default.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1 ),
    Type 1 Gauge Metadata(
        :Y1(
            Lower Tolerance( 49.014 ),
            Upper Tolerance( 51.014 ),
            Reference( 50.014 ),
            Resolution( .001 )
        )
    )
);
Wait( 1 );
obj << (Type 1 Gauge Analysis[1] << Run Chart( 1, Show Portion of Tolerance( 0 ) ));
Wait( 1 );
obj << (Type 1 Gauge Analysis[1] << Run Chart( 1, Show Portion of Tolerance( 1 ) ));

Show Reference

Syntax: obj << ( Type 1 Gauge Analysis[number] << Run Chart( 1, Show Reference( state=0|1 )))

Description: Shows or hides the reference line on the run chart in the Type 1 Gauge Analysis report. On by default.

dt = Open( "$SAMPLE_DATA/Variability Data/Type 1 Gauge MSA.jmp" );
obj = dt << Type 1 Gauge(
    Y( :Y1 ),
    Type 1 Gauge Metadata(
        :Y1(
            Lower Tolerance( 49.014 ),
            Upper Tolerance( 51.014 ),
            Reference( 50.014 ),
            Resolution( .001 )
        )
    )
);
Wait( 1 );
obj << (Type 1 Gauge Analysis[1] << Run Chart( 1, Show Reference( 0 ) ));
Wait( 1 );
obj << (Type 1 Gauge Analysis[1] << Run Chart( 1, Show Reference( 1 ) ));